







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Sunrise Manor Owner’s Guide
We install Unilock-compatible windows and doors for homeowners across Sunrise Manor, and full window replacement here typically runs $4,500 – $15,000 depending on count, glass package, and frame condition. Impact-rated units, which matter more every year in the east valley, run $8,000 – $25,000. Most owners don’t discover a failing unit until the symptoms show up in the house: a door that won’t latch when the afternoon sun hits it, condensation fogging the glass from the inside, or a draft you can feel at the jamb even after you’ve caulked it twice.

Bradford Remodeling Sunrise Manor is an independent service provider and is not affiliated with Unilock.
Which Unilock Models This Apply To

Unilock window and door systems show up in a range of Sunrise Manor housing stock, from mid-2000s stucco builds to newer infill construction. The part you need is determined by three things, not one: the series line, the rough opening size, and the glass or frame specification stamped on the unit itself. That order matters, because two Unilock units that look identical from the curb can take different replacement parts if the series differs.
Start with the manufacturer’s label. It’s usually on the side jamb of a window or the hinge-side edge of a door slab. Photograph it before you order anything. The label typically carries the series, the size callout, and a glass spec code. If the label is painted over or gone, measure the rough opening yourself with a tape, edge to edge, and take the depth too. Dealers and installers can work from those measurements, but guessing at the series instead of measuring is where most Sunrise Manor homeowners end up buying the wrong part.
The OEM-versus-aftermarket decision is worth being honest about. OEM parts for Unilock units fit the first time and hold the original glass spec, which keeps the energy rating of the assembly intact. Quality aftermarket equivalents cost less and are fine for hardware like locks, rollers, and sweeps. For sash, frame, glass, and threshold parts, we generally recommend the OEM route because the fit and the spec are both documented. A cheaper part that changes the condensation performance of a window is not cheaper once you’ve lived with it through a summer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
- Glass fogging between the panes. That’s a failed seal in a double-pane unit. The gas has escaped and the desiccant is saturated, so moisture shows up inside where you can’t clean it.
- Condensation on the interior glass, not the exterior. Interior condensation points to a glass or spacer failure rather than a weather problem. Sunrise Manor’s summer humidity swings push failing seals hard.
- A door that drags, sticks, or won’t latch in the afternoon. Heat expansion moves the frame and slab. When it happens only in the heat, the alignment is drifting and the hinge or frame is the cause.
- Daylight visible at the frame, or a draft at the jamb. The weatherstrip, sweep, or a settling frame has opened a gap. Sealing around it doesn’t fix a worn part.
- Water staining or soft wood at the threshold or frame base. Repeated monsoon exposure has gotten past the sill pan or a failed sealant joint. This one gets worse quietly and shows up as interior damage later.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Window replacement in Sunrise Manor runs $4,500 – $15,000 installed. Impact window installation runs $8,000 – $25,000. Where you land in those ranges depends on unit count, the series and glass package you’re matching, and how much frame and trim work the opening needs once the old unit comes out.
Here’s how we break it out so the number doesn’t move on you: parts, labor, disposal of the old unit, and any trim or sill repair that’s part of the documented scope. We give you a written price before any work starts. There’s no numbers-at-the-door reprice, and no change order without a conversation and your sign-off.
Every install we complete carries the 365-Day Done Right Promise. That’s a full-year written guarantee: if the work fails inside that window, we come back and correct it at no charge, and you have the signed guarantee in hand at close. Full detail on the terms and what’s covered is spelled out in writing before the job begins.
DIY or Call Us?
Some of this you can check yourself, and we’d rather you did. Look at the label, photograph it, measure the rough opening, and test a door’s latch in the heat of the day versus the morning. Note whether condensation is inside the glass or on the surface. That information makes the first phone call useful.
Where DIY goes wrong is the swap itself. Glass units and exterior door slabs are heavy, and a dropped sash or an improperly flashed opening turns a parts job into a water intrusion problem. Our technicians have up to 22 years of experience with window and door systems, and they’re background-checked and uniformed, so you know who’s at your door before the crew arrives. Give us a call at (844) 834-2810. A live person answers, day or night, and estimates are free.
FAQs

Plan on 15 – 20 years for the unit itself and 10 – 15 for the glass seal in this climate. The desert sun and monsoon humidity swings are hard on seals and weatherstrip. Windows facing west take the worst of it and tend to go first.
Call (844) 834-2810 for an exact quote. Estimates are free.
Often yes, and we’d rather repair when the repair is honest. Locks, rollers, sweeps, hinges, and weatherstrip are replaceable on their own. A fogged glass unit or a frame that’s shifted out of square means the assembly has to come out, and no adjustment fixes that.
Call (844) 834-2810 and we’ll tell you straight which one you’re looking at.
Most single-window or single-door replacements are done in a day. A whole-house window replacement usually runs two to four days depending on count and trim work. We give you the schedule in writing with the price, and we don’t leave the site until the day’s scope is closed out and the site is clean.
Call (844) 834-2810 to schedule your free estimate.
From your label and your measurements, not from a guess. We confirm the series and size against the documented spec before anything is ordered, and if the label is unreadable we measure the rough opening ourselves. We don’t inventory parts and we don’t carry stock on a truck, so the part is ordered to your unit.
For an exact quote on your Unilock window or door, call (844) 834-2810. We also service KraftMaid, Cambria, and Silestone products in Sunrise Manor homes.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












