







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Sunrise Manor Owner’s Guide
We install and repair Therma-Tru door and entry systems on Sunrise Manor homes and handle the roofing detail around them, and a failed component is usually a same-week fix once the right part is matched. Typical repairs run $400 – $1,800, and full roof replacement where the entry surround is being rebuilt runs $8,000 – $20,000. The failure usually announces itself the same way: daylight at the top corner of the door, a dark streak on the ceiling beside the entry, or water beading on the threshold after a monsoon.

Sunrise Manor owners tend to find the problem after a big rain, not during it. The ingress starts small, at a flashing detail or the frame seal, and shows up as a stain rather than a drip. We get a written price in your hands before any work starts, so the scope of a Therma-Tru entry and roof repair is settled before a tool comes out.
Which Therma-Tru Models This Applies To

Therma-Tru builds doors, not roofing, so the parts we’re dealing with are the weatherproofing components sold with and around a Therma-Tru entry: the frame, the threshold, the sill, trim, sidelites, and the flashing that ties the entry head and side jambs into your roof plane and wall. The Fiber-Classic and Smooth-Star lines are the most common in Sunrise Manor subdivisions, and the part number for the frame and sill is printed on a label on the hinge-side jamb, plus a small stamp on the threshold sill itself. Take a photo of both before you call.
That label is where most owners get stuck, and it’s a real compatibility gotcha: Therma-Tru sill thresholds come in different depths for 4-9/16-inch and 6-9/16-inch walls, and the wrong depth won’t seal against your substrate no matter how well you caulk it. A sidelite frame from one series doesn’t drop into another. Measure the wall depth at the jamb, not the door width, and match the sill to it.
On the OEM-versus-aftermarket question, Therma-Tru replacement sills, sweeps, and trim come with the correct profile and manufacturer specs behind them. Quality aftermarket flashing and sealants are fine where the profile isn’t proprietary, and we use them without hesitation on the roof-side detail. What we don’t do is force a universal part into a proprietary Therma-Tru channel. We work with a documented roster of name-brand materials, Therma-Tru doors among them, so the spec on your entry is traceable. Bradford Remodeling Sunrise Manor is an independent service provider and is not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
- Daylight or a draft at the top corner of the frame. The head flashing or the sealant line above the entry has opened, letting water track behind the frame instead of over it. It’s the first thing to check after a storm.
- A water stain on the ceiling or wall next to the door. The roof plane above the entry is shedding into the wall cavity, usually at a step flashing that was never correctly lapped. This one moves fast, so don’t wait.
- Water standing on the threshold or pooling inside the sill. A sill that’s the wrong wall depth, or a worn sweep and weatherstrip, lets wind-driven rain past the door. In Sunrise Manor’s summer monsoon, that pool happens in minutes.
- Cracked or chalky sealant and peeling paint along the trim. Sunrise Manor’s sun and 100-degree-plus summer heat break down sealant faster than anywhere in the country, and a failed caulk joint is a water path once the fall rain arrives.
- Rust on the threshold or hinge screws, or a soft spot in the frame. Water has been reaching the metal and the wood beneath the door for a while. That’s a repair to schedule now, not at the next failure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Repair of the entry surround and roof detail in Sunrise Manor runs $400 – $1,800, and a full roof replacement where the entry area is being rebuilt runs $8,000 – $20,000. A door-only component swap, like a sill or threshold, is often a few hundred dollars; the higher end of the range is flashing rebuilt around the entry and the roof plane above it, which is a bigger job than it sounds. We give you a written price range in dollars on the page and a firm number at the site, never a figure that moves at the door.
What drives the range: which series you have, whether the sill needs the frame pulled to match wall depth, how far water has traveled into the substrate, and how much roofing has to come up to reach the flashing. Everything’s broken out line by line. Every completed project carries the 365-Day Done Right Promise, a full-year written guarantee; if the repair fails inside that window, we come back and correct it at no charge, and you hold the signed guarantee at job close.
DIY or Call Us?
You can safely check a few things yourself: look for daylight at the frame corners, press a screwdriver into the frame and sill to check for soft wood, and read the jamb label so you know your wall depth before anyone quotes you. What we don’t recommend is climbing to the roof detail yourself. Rebuilding flashing around the entry head means working at the roof plane, pulling shingles or tiles back, and setting the new flashing so it laps correctly. Get that wrong and the leak moves rather than stops. On a one-story entry with a low slope it’s tempting, and it’s still not the place to learn. Call us at (844) 834-2810 for a free estimate and we’ll tell you exactly what’s involved.
FAQs

A correctly flashed and sealed Therma-Tru entry holds up well here, but the sealant line and weatherstrip should be checked every two or three years because the sun and heat wear them faster than in most climates. The frame and sill themselves last far longer when water isn’t reaching them. Call (844) 834-2810 for a free estimate on keeping yours sealed.
Usually yes, and that’s where we start, since a sill, sweep, or flashing repair is a fraction of the cost of a new entry. If the frame or substrate has gone soft from prolonged water, the repair is bigger. We inspect first and quote the smaller fix if it will hold. Call (844) 834-2810 for a free estimate.
A part-only swap like a sill or threshold is typically a same-week job, while flashing rebuilt around the entry head and roof plane takes longer and depends on the roof material. We give you a realistic timeline with the written price. Call (844) 834-2810 to schedule your free estimate.
We match your label and sill depth to the correct Therma-Tru profile and use quality aftermarket flashing and sealants where the profile isn’t proprietary, all with the manufacturer’s specs in hand. You’ll see the part spec in the written scope before work begins. Call (844) 834-2810 for a free estimate.
We also handle KraftMaid, Cambria, and Silestone products as part of our documented brand roster.
When you’re ready, call Bradford Remodeling Sunrise Manor at (844) 834-2810 for a free estimate. A live person answers around the clock, our technicians have up to 22 years of experience and arrive background-checked and uniformed, and you’ll have the written price before any work starts.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












