A Bradford company - serving Sunrise Manor, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Sunrise Manor

Schluter Home Additions & ADU in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in pantry with wood shelving
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Home Additions & ADU: The Sunrise Manor Owner’s Guide

Home additions and ADUs don’t have a “part” that fails the way a spring or a valve does – building a new room or a detached unit isn’t a swap job, and no single component wears out and gets replaced. What fails instead is the waterproofing and substrate system under the tile and flooring, and Schluter products are the layer most homeowners learn about only after a shower pan leaks or a floor tile cracks. If that’s where you are, we install Schluter systems inside additions and ADUs in Sunrise Manor, and a full home addition runs $45,000 – $130,000 while an ADU runs $90,000 – $220,000 – and no, this isn’t a same-day job. Nobody builds a habitable structure in an afternoon. We schedule a site visit and a written price before any work starts. Bradford Remodeling is an independent contractor and is not affiliated with Schluter.

Professional contractor installing marble countertop on kitchen cabinets during renovation in Sunrise Manor, NV

Call (844) 834-2810

Which Schluter Models This Applies To

Schluter makes hundreds of discrete system components, and the part that matters depends on where in the build it sits. For a wet area in an addition – a new shower, a converted bath, a laundry rough-in – the real workhorse is the bonded waterproofing membrane, whether that’s KERDI membrane in a sheet or KERDI-BOARD as a backer panel. For floors over a slab or over wood joists, the decoupling layer is DITRA or DITRA-HEAT if you’re adding radiant heat. For an exterior threshold or a step between an ADU slab and a doorway, it’s likely a Schluter stair-nosing or transition profile. Sizes matter: KERDI-BOARD comes in thicknesses typically from about 1/8 inch up to 2 inches, and using the wrong thickness throws off your finished wall plane relative to the door jamb and trim. Read the printed label on the board or membrane – Schluter stamps thickness and product code directly on the panel – and measure twice. There’s no meaningful aftermarket substitute for Schluter’s membrane system; generic waterproofing sheet may share a name but not the certified thickness or the warranty chain. Match the Schluter part number, not a lookalike.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Home Additions & ADU Is Failing

These are the symptoms homeowners in Sunrise Manor actually call about, which usually trace back to the waterproofing or substrate layer rather than the tile or the trim:

  • Grout lines cracking in a straight grid. That pattern usually signals movement in the substrate beneath the tile – a decoupling layer that wasn’t installed, or was installed over a slab with a crack it didn’t isolate. Straight-line cracks are the fingerprint of a failed bond, not a cosmetic grout problem.
  • A soft or “hollow” spot under a floor tile. Tap across the floor with a coin. A tile that sounds hollow is sitting on a void, often where the substrate wasn’t properly prepped or where moisture got under the membrane.
  • Grout or caulk discoloration at a shower base. Persistent mildew that comes back after cleaning likely means water is trapped behind the tile – a failed bond at the Schluter membrane, or a missing pre-sloped shower tray.
  • Tile lifting at a step or doorway edge. Transition profiles loosen when the adjacent slab or subfloor has shifted. This shows up most on ADU slab-to-house thresholds where the two structures settle differently.
  • Efflorescence (white powdery staining) on grout or base. This is salt pushed to the surface by moisture migrating through the assembly – a sign the waterproofing is compromised somewhere upstream.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A tile setter installing wall tile in a shower

Because this isn’t a swap-in-a-part service, “replacement cost” for a Schluter addition or ADU project means the full build or rebuild of the affected area. Here’s the Sunrise Manor pricing range we work from, with a written price before any work starts and no numbers that move once the truck is on site:

Scope Installed Price Range
Home Addition (room or extension, full build) $45,000 – $130,000
ADU Construction (detached unit) $90,000 – $220,000
Garage Conversion (to living space) $30,000 – $80,000
Bathroom Remodel with Schluter waterproofing $9,000 – $28,000
Walk-In Shower Installation (KERDI system) $4,500 – $12,000
Tile floor over slab with DITRA decoupling $2,000 – $6,500 (countertop range applies to surface work; floor assemblies priced per square foot in the scoped estimate)

What drives the range: square footage, whether you’re building new or converting existing space, whether structural work is needed (headers, slab cuts, framing for a door rough-in), the thickness and type of Schluter panels specified, and finish level. Every quote is line-item and written. The work is covered by our 365-Day Done Right Promise – if something fails inside the guarantee period, we come back and correct it at no charge.

DIY or Call Us?

You can safely check a few things yourself: read the printed product code on a Schluter panel, tap floor tiles to find hollow spots, test base perimeter for moisture with a simple humidity meter, and photograph any cracking or efflorescence for the record. What you should not do yourself is attempt to install or replace Schluter’s bonded waterproofing membrane, build a shower pan, or re-tile over a failed substrate. This is not a spring or an electrical panel, but the risks are real in a different way – a compromised waterproofing layer means water damage and mold inside your walls, and a failed floor-over-substrate assembly can mean cracked tile and, in a bad case, a structural problem you can’t see. A mis-installed Schluter assembly also voids Schluter’s own warranty and ours. If you’re unsure, call us at (844) 834-2810 and we’ll tell you straight whether it’s a check-the-tile hour or a rebuild.

FAQs

An open living space after a whole-home remodel

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled family room with new windows and a window seatA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawer

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 834-2810
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Bradford Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch