







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Sunrise Manor Owner’s Guide
Schluter bathroom remodeling in Sunrise Manor typically runs $9,000 to $28,000 installed, depending on shower size, tile selection, and how much of the waterproofing assembly has to be rebuilt. We install Schluter-compatible systems with a written price before work begins and a 365-Day Done Right Promise on the finished job. Most owners don’t call because of a single part. They call after a small failure spreads: a loose shower curb, grout cracking in a straight line, a soft spot at the drain, or mold at the bottom of the wall. We’re an independent contractor and not affiliated with Schluter, and we’ll tell you plainly whether the system can be repaired or has to come out.

Which Schluter Models This Applies To

Schluter makes two families of product homeowners end up holding: the waterproofing system (Kerdi and Kerdi-Board) and the underlayment family (Ditra, Ditra-Heat). On a bathroom job, both matter, and mixing them up is the most common source of a wrong purchase.
Identifying a membrane is mostly about the printed roll edge. Kerdi carries a printed strip with the product name and the thickness; it’s typically 5 mil (about 0.2 mm) when wet. Ditra is recognizable by its waffle pattern, with an uncoupling cavity roughly 3/16 inch deep. If the printed edge is gone or painted over, the finished tile hides the answer and a moisture test on a cut-off scrap is the practical route.
Note that this is a parts page for a system, not for skis or furniture – “model” here means the membrane series and the fittings (inside and outside corners, Kerdi-Fix, drain flange kit, banding). On OEM vs aftermarket: the genuine Schluter sealant and corner pieces are worth the difference on a shower because the warranty is a system warranty, and third-party pieces break the chain. For some fittings – a matching tile trim, a spare drain grate – a quality equivalent is fine. We tell you which is which before you spend. We also handle KraftMaid, Cambria, and Silestone in the same jobs, so one written scope covers the whole room.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
- Grout cracking in a straight line across the shower floor. Usually the uncoupling layer is absent or incorrectly bonded, and the tile is moving against a rigid substrate. A horizontal crack that appears weeks after install is a sign, not a coincidence.
- A soft or spongy feel at the drain. Water has reached the flange and the mud bed or board under it. In Sunrise Manor, where the water is hard and the summer heat drives constant wet-dry cycling, this shows faster than in cooler markets.
- Mold or dark staining at the base of the wall. Moisture is wicking behind the tile and finding the wall cavity. That usually means the banding at the floor-wall seam was skipped or the overlap was too small.
- Loose tiles at the curb or bottom row. The curb is the highest-stress point in a shower and the first place a flashed seam fails. Tiles that move under thumb pressure have already lost bond.
- A cool, damp patch on the floor on the other side of the wall. This is a leak through the pan, not the tile. The waterproofing membrane is compromised, and the fix is a tear-out and rebuild, not a spot repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full bathroom remodel in Sunrise Manor runs $9,000 to $28,000. A smaller or narrow bath stays in the $5,000 to $12,000 band on our small bathroom remodel scope. When the failure is the wet area only, the job splits out like this:
- Shower replacement with a Schluter system: $3,000 to $8,500
- Walk-in shower install: $4,500 to $12,000
- Tub-to-shower conversion: $3,500 to $10,000
- Vanity replacement, if the rot reached the cabinet: $800 to $3,000
The range moves most on tile choice, whether the substrate (the board under the tile) is salvageable, and how much demo is needed. The Schluter membrane, banding, corners, and Schluter-set thinset are items in the written scope, priced as a line, not a mystery. Every completed job carries the written 365-Day Done Right Promise: if it fails inside that year, we come back and correct it at no charge. Written price before work starts – every time.

DIY or Call Us?
You can safely check one thing: touch the grout line at the shower floor, press a tile with your thumb, and look for a damp spot on the floor behind the wall. That tells you where the problem is, not whether you should rebuild it.
Where DIY goes wrong: Schluter is a system, and the system only works when the overlap is right – a 2-inch minimum at every membrane seam and a Schluter band on every inside corner. One missed corner and the shower fails six months after you’ve tiled it. The other risk is the tile itself. Tearing out a set floor means a chisel, a pry bar, and a lot of force in a room with a live plumbing line; a misjudged hit at the valve has taken out more than one water shutoff. Get a pro to at least look. Call (844) 834-2810 for a free estimate in Sunrise Manor – we’ll tell you straight if the pan can be saved.
FAQs

Schluter’s own published data rates Kerdi and Ditra at 20+ years in service, and in our market the practical floor is closer to 15 to 20 for a shower that’s used daily. Sunrise Manor’s hard water and heat cycling push the sealant and curb over time. Call (844) 834-2810 for an exact inspection – estimates are free.
Sometimes. A single failed band or a loose curb tile can be repaired with the membrane and Schluter band, keeping the rest of the shower. A wet pan or substrate leak cannot – that’s a tear out and a rebuild. We give you the honest read before quoting. Call to schedule the free estimate.
A shower rebuild with a Schluter membrane is usually 5 to 10 working days once materials arrive, with tile cure time added. A single band repair is a half day. Both start with a written schedule before a single tool comes out – call (844) 834-2810 for a firm date.
We order directly from Schluter’s authorized distribution network – genuine Kerdi, Ditra, banding, corners, and Kerdi-Fix, with the paperwork to prove it. We don’t stock parts on a truck and don’t have a warehouse to sell from; we order your specs and inspect on arrival. That keeps the system warranty intact. Call (844) 834-2810 to lock in your specs.
Every Sunrise Manor job is quoted in writing before any work starts, and every finished project carries the 365-Day Done Right Promise – if the work fails inside that year, we return and correct it at no charge. Our technicians have up to 22 years of experience, and the crew arrives background-checked and in uniform. Call (844) 834-2810 for a free estimate – a live person answers 24/7.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












