







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Driveway & Pavers: The Sunrise Manor Owner’s Guide
We install and repair Sakrete-based driveways and paver systems across Sunrise Manor. A full paver driveway installation here runs $7,000 – $18,000, and a concrete driveway poured with Sakrete mix runs $4,500 – $12,000. Paver repair and re-sanding are typically handled within a few days of your call, not a few weeks. Call (844) 834-2810 for a written price before any work starts.

Most Sunrise Manor homeowners find out something is wrong the same way: a hairline crack spiderwebs across the slab after a summer, or a paver edge lifts and the sand beneath it washes out during a monsoon gully-washer. Sakrete is a mortar and concrete product line, not a machine with a model number, so “Sakrete driveway and pavers” usually means the mix and setting materials behind the hardscape. When those materials fail, the surface above them goes with it.
Key Takeaways
- Paver driveway installation in Sunrise Manor: $7,000 – $18,000 installed.
- Concrete driveway installation using Sakrete mix: $4,500 – $12,000.
- Driveway sealing to protect the surface: $250 – $700.
- Nevada’s freeze-thaw swings and summer heat are the two biggest causes of early failure here.
- We’re an independent contractor, not affiliated with Sakrete. We work with the product you already have or specify a documented equivalent.
Which Sakrete Products This Applies To

Sakrete isn’t a single product, so the first step on any Sunrise Manor job is identifying what’s actually under your driveway or pavers. The common lines we see on residential hardscape work are Sakrete High-Strength Concrete Mix (the 80 lb bag most often used for slabs and footings), Sakrete Sand Mix and Mortar Mix for bedding and joint work, and Sakrete Paver Set or polymeric sand for locking pavers in place. Each has a different strength rating and cure behavior, and swapping one for another is where DIY jobs go sideways.
To identify what you have, check the original bag label if you kept it, or look at the surface itself. A poured slab that’s dense and gray with a smooth finish was likely High-Strength Concrete Mix. A paver field with sand joints that stay put after rain used polymeric sand. Loose, shifting pavers with sand washing out almost always point to plain mason sand that was never meant to lock the joints.
On the OEM-versus-aftermarket question: Sakrete is a brand name, but the underlying materials (Portland cement, sand, aggregate) are commodity inputs. A quality aftermarket concrete mix with a documented PSI rating and a matching cure schedule is a legitimate substitute for most residential driveway work. Where we don’t cut corners is on the mix strength for load-bearing slabs. A 4,000 PSI mix and a 2,500 PSI mix look the same in the bag and behave very differently under a truck tire after two Sunrise Manor summers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Driveway & Pavers Is Failing
- Hairline cracks spreading across the slab. Caused by insufficient control joints, a mix that cured too fast in desert heat, or ground movement beneath. A single crack isn’t an emergency; a web of them usually means the slab is done.
- Pavers lifting or rocking underfoot. The bedding sand or polymeric joint sand has washed out or wasn’t compacted properly. Once one paver moves, water gets under the field and the problem spreads.
- Sand washing out of the joints after rain. Polymeric sand that wasn’t activated correctly, or plain sand used where polymeric was needed. Sunrise Manor’s monsoon season exposes this fast.
- Efflorescence: a white, chalky film on the surface. Mineral salts migrating up through the concrete as it cures or as moisture moves through it. Sometimes cosmetic, sometimes a sign of ongoing water intrusion.
- Sunken or heaved sections. The base underneath (the compacted gravel layer) settled or swelled with moisture. This is a base problem, not a surface problem, and patching the top won’t fix it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what installed driveway and paver work costs in Sunrise Manor, based on real jobs in this market:
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation (Sakrete mix) | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Full driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the range: square footage, base prep depth (a driveway over hard caliche soil costs more to excavate than one over loose fill), paver style, and whether existing material has to be hauled off. Every job gets a written price before any work starts, and there are no numbers that move at the door. All completed work is covered by our 365-Day Done Right Promise: if the driveway or paver field fails within that year, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely check the basics: walk the driveway and mark where pavers rock, hose down a section to see where water pools or drains, and look at the joints to see if sand is missing. That’s useful information to have before you call anyone.
Where DIY goes wrong is in the labor. A 12×20 concrete pour is roughly 2.5 cubic yards of material, which is 60+ bags of Sakrete mix, all mixed and placed within a working window before it sets. In Sunrise Manor heat, that window is short. Get the mix consistency wrong and the slab cures brittle. Skip the control joints and it cracks on schedule. Lay pavers without proper base compaction and the whole field shifts after the first monsoon. The tools, the timing, and the base prep are what a crew brings. Call (844) 834-2810 for a written price and a real timeline.
FAQs

A properly installed concrete driveway with a 4,000 PSI mix and cut control joints typically lasts 25 – 30 years in Southern Nevada. A paver driveway with a properly compacted base and polymeric joint sand typically lasts 20 – 25 years. The main threats are heat cycling and monsoon water intrusion, both of which good base prep handles. Call (844) 834-2810 if your driveway is showing early signs.
Often, yes. Isolated cracks can be filled and sealed, individual pavers can be lifted and re-bedded, and joint sand can be replaced. Full replacement only makes sense when the base has failed or the cracking is widespread. We look at the base first, not just the surface, before recommending either path. Call us for a free estimate.
A typical residential paver driveway in Sunrise Manor takes 2 – 4 days from demo to final compaction. A concrete pour takes 2 – 3 days including cure time before you can drive on it. Weather and base conditions can add a day. We’ll give you a specific timeline with the written price.
We source Sakrete and equivalent products through local building supply channels and match the mix strength to your specific application. We don’t carry it on a truck or stock it in a warehouse. The right mix for a load-bearing driveway slab is different from the one for a paver base, and we specify it in writing before work starts. Call (844) 834-2810 for a free estimate.
If you also need cabinetry, countertops, or surfaces as part of a larger project, we work with KraftMaid, Cambria, and Silestone alongside our hardscape work.
Ready to get your Sunrise Manor driveway squared away? Call Bradford Remodeling at (844) 834-2810 for a free estimate. You’ll get a written price before any work starts, a background-checked crew on the job, and the 365-Day Done Right Promise backing every finished project.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












