







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Kitchen Remodeling: The Sunrise Manor Owner’s Guide
Owens Corning doesn’t make a single “kitchen remodeling part” you can pull off a shelf – the brand’s kitchen-relevant products are insulation (including its FOAMULAR rigid board and R-series batts), and any failed piece in a Sunrise Manor kitchen usually comes down to which Owens Corning material was spec’d into the wall, ceiling or subfloor. A full kitchen remodel with Owens Corning insulation installed to spec typically runs $14,000 – $45,000 in Sunrise Manor; a targeted insulation or substrate correction inside an otherwise standing kitchen is a fraction of that, and we quote it in writing before tools come out. Owners usually find the problem the same way: a soft spot near the sink, a cold wall behind the cabinets, condensation on a can light, or a remodel estimate that flagged “insulation at end of life.”

Key Takeaways
- Owens Corning kitchen work = insulation and substrate, not cabinet hardware. Match the product, not the marketing.
- Installed kitchen remodel pricing in Sunrise Manor: $14,000 – $45,000; small kitchen: $9,000 – $20,000.
- Every price is written before work starts, and every completed job carries the 365-Day Done Right Promise.
- Bradford Remodeling Sunrise Manor is an independent contractor, not affiliated with Owens Corning.
Which Owens Corning Models This Applies To

Owens Corning’s kitchen-relevant lines break into three families, and knowing which one is in your wall decides both the part and the price. FOAMULAR rigid foam board (common grades NGX, 150, 250, 400) is what you’ll find behind exterior kitchen walls and under slab-on-grade in Sunrise Manor’s newer builds. R-series fiberglass batts and rolls (R-13, R-15, R-19, R-21) fill the stud cavities; the R-value is printed on the kraft or foil facing. And Owens Corning’s duct wrap and acoustic batts turn up around kitchen exhaust chases and shared walls in attached Sunrise Manor homes.
To identify your part, read the facing label or look for the printed “OWENS CORNING” foil stamp, then measure the product thickness – 1/2″, 3/4″, 1″, 1-1/2″ and 2″ are the standard FOAMULAR thicknesses, and buying the wrong one changes your R-value and your framing depth. The genuine gotcha: FOAMULAR NGX (the newer formulation) and legacy FOAMULAR are not interchangeable on R-value per inch, so a repair that swaps one for the other without checking the label quietly under-insulates the kitchen.
OEM versus aftermarket is a real decision here. Owens Corning insulation is widely available through building supply channels, so OEM-equivalent product with a matching ASTM rating is usually the smarter buy – you get the spec without the markup. What matters is the number on the label, not the logo on the truck. We specify Owens Corning in kitchens where it fits the wall assembly, and we also work with KraftMaid and Cambria for the cabinetry and surfaces side of the same job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Kitchen Remodeling Is Failing
- Condensation on kitchen can lights or ceiling. Warm interior air is meeting a cold surface because the ceiling insulation (likely an R-series batt) has compressed or pulled away. In Sunrise Manor’s desert swing – 100°F+ days and cold winter nights – that gap shows up fast.
- A cold or damp exterior wall behind the cabinets. FOAMULAR board that was cut short around a rough-in, or never installed at all, leaves a thermal bridge. You feel it on a winter morning and the wall may show staining.
- Soft or spongy subfloor near the sink or dishwasher. This is moisture intrusion into the substrate under the kitchen, not an insulation failure per se – but a failed vapor path and degraded board are often the same job.
- Visible sagging or curtain-fall off the batts in an open wall. Fiberglass that has lost its friction fit is doing almost nothing for R-value. It’s a straightforward replacement once the wall is open.
- A remodel estimate that flagged “insulation at end of life.” If a previous contractor told you the wall or ceiling insulation needs to come out, get the label read before you agree to a full swap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers land in Sunrise Manor, using our published pricing:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel (Owens Corning insulation spec’d) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range is driven by wall access (opening one cavity is not opening six), the R-value you’re upgrading to, whether the substrate under the kitchen is wet, and cabinet or countertop work that rides along with the insulation correction. Every price is a written line-item before work starts – parts and labor broken out, no numbers that move at the door. And every completed job is covered by the 365-Day Done Right Promise: if the installed work fails inside that full year, we come back and correct it at no charge.

DIY or Call Us?
Some of this is safe to check yourself. You can read the label on your existing batts, measure the thickness of the FOAMULAR board behind a cabinet cutout, and snap a photo of the foil stamp for us to identify. What we’d steer you away from is opening exterior walls to swap insulation on your own – the product itself isn’t dangerous, but the vapor barrier and air-sealing on an exterior wall are unforgiving in Sunrise Manor’s climate, and a botched re-install that traps moisture causes more damage than the original failure. If your kitchen also involves gas lines or old wiring in the wall, that’s a hard stop for a trained professional, not a weekend job.
Call (844) 834-2810 to schedule a free estimate. A live person answers, 24 hours a day, seven days a week – not a voicemail queue. We’ll read the product with you, quote the correct replacement in writing, and put the guarantee on paper before we touch the wall.
FAQs

Fiberglass batts and FOAMULAR board typically hold their rated performance for decades, but in Sunrise Manor’s climate the failure usually isn’t the material – it’s installation. Cut-short board, compressed batts and a broken air seal fail first, often inside 8 – 12 years of a kitchen remodel. Call (844) 834-2810 for an exact quote on a replacement – estimates are free.
Yes, in the right cases. If the fiberglass batts have simply lost friction fit in an open cavity, re-friction or a spot replacement does the job. If the FOAMULAR board is degraded or the R-value is below what your wall assembly calls for, replacement is the honest call. We’ll tell you which one you’re facing after looking at the label.
A single kitchen cavity or ceiling section is usually a one-day job once the wall is open; a full kitchen remodel with an insulation correction baked in runs longer and we give you the timeline in the written scope. No surprise schedule changes – the date is in the paperwork before we start.
We spec the correct Owens Corning product through building supply channels to match the R-value and thickness your wall and ceiling assembly needs – we don’t carry parts on a truck or stock them. You get the right spec, not the closest one on the shelf. Call (844) 834-2810 and we’ll walk through the match together. Bradford Remodeling Sunrise Manor is an independent contractor and not affiliated with Owens Corning.
Whether your Sunrise Manor kitchen needs an Owens Corning insulation correction or a full remodel with KraftMaid cabinetry and a Cambria surface, the first step is the same: a written price before any work starts. Call (844) 834-2810 for a free estimate – a live person answers, and every completed project carries the 365-Day Done Right Promise in writing.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












