







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunrise Manor Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in Sunrise Manor, and what sets our work apart is hardware-level expertise: we know the roller gauge, sweep materials, and hinge anchoring that decide whether your enclosure needs a modest repair or a full replacement. We’re not affiliated with or authorized by Mr-Glass. We’re an independent specialist, and our crews have worked on enough Mr-Glass frameless and semi-frameless enclosures in the Las Vegas Valley to recognize exactly how these products fail. Call (844) 834-2810 for a free estimate.

Why Trust Bradford Remodeling Sunrise Manor for Your Mr-Glass Construction?

Our technicians have up to 22 years of experience, and a good portion of that has been spent on Mr-Glass enclosures specifically. The Frameless Sliding Shower Door, the Semi-Frameless Pivot, the Bi-Fold Tub Enclosure, the Custom Neo-Angle corner unit: each has its own failure pattern, and each demands the right parts to correct it without creating a new problem.
We source OEM-compatible Mr-Glass roller assemblies, sweeps, and hinge hardware whenever the original profile is still available. Aftermarket rollers often look identical but run a slightly different track gauge, which causes repeat drag six months down the road. When a profile is discontinued, we’ll tell you plainly and recommend a quality universal kit that actually fits. Warranty-safe practice matters too: we don’t drill new holes through a tempered panel or modify the frame in ways that void coverage, and we’ll explain what we’re doing and why before we touch anything. Every Mr-Glass job in Sunrise Manor gets a written price before work starts, and our 365-Day Done Right Promise covers the work for a full year.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Sunrise Manor
These are the failures we see most often on Mr-Glass enclosures in Sunrise Manor, and what actually causes them.
- Roller and guide-track wear on Frameless Sliding doors. The carriage wheels flatten over time while the top track fills with hard-water scale. The door drops, drags, or jumps the rail. It’s usually both problems at once, not one or the other. In Sunrise Manor, where water runs hard, that scale builds faster than most owners expect.
- Bottom sweep and magnetic seal failure. The clear vinyl sweep hardens and yellows under desert UV, then stops sealing against the curb. Water escapes onto the bathroom floor. A sweep is a wear item, not a defect, and it needs replacing every few years in our climate.
- Hinge and bracket screw pull-out on Semi-Frameless Pivot doors. When the enclosure was anchored without proper backing behind the tile or studs, pivot hinges loosen and the door sags. The glass drifts out of alignment with the wall. This is an anchoring problem, not a glass problem, and it requires correcting the backing, not just tightening screws.
- Silicone and setting-block breakdown at the fixed panel. Hard-water minerals and sun exposure degrade the seal at the curb and floor line. You get a persistent leak that no amount of re-caulking seems to fix, because the setting blocks underneath have shifted or compressed.
- Neo-Angle corner enclosure leaks at the miter joints. The angled glass-to-glass seams on a Custom Neo-Angle unit take more stress than a straight run. When the original sealant fails, water tracks along the frame and onto the floor. These need proper disassembly and reseating, not a surface bead of caulk.
Mr-Glass Parts & Our Repair-vs-Replace Approach

OEM Mr-Glass roller assemblies, sweeps, and hinge hardware are the right call whenever the original profile is still available. Aftermarket rollers rarely match the track gauge, and a mismatched roller causes the same drag you were trying to fix. For discontinued enclosures, a quality universal roller-and-sweep kit is a sound alternative, and we’ll say so honestly rather than pushing a replacement you don’t need.
We don’t claim to stock Mr-Glass parts locally. Parts are sourced per job based on the exact model and profile, which takes a little coordination but means you get the right hardware the first time. When the glass is chipped, the panel is tempered and compromised, or the frame is corroded through, replacing the enclosure beats patching hardware. We’ll state that trade-off plainly and put the number in writing before any work starts. Call (844) 834-2810 to talk through your options.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the rollers, track, sweep, hinges, and the fixed-panel seal. We check whether the enclosure was anchored with proper backing. We identify the exact Mr-Glass model or profile so parts can be matched correctly.
- 2
Repair or install. For a hardware fix, we remove the door panel, replace rollers and sweep with correctly gauged parts, clean and realign the track, and re-set the fixed panel with fresh silicone and setting blocks. For a new install, we set the enclosure square to the curb and verify clearances before final sealing.
- 3
Test. We open and close the door through its full range, check that it clears the tile without contacting the curb, and run water to confirm no leaks at the curb, floor line, or miter joints.
- 4
Warranty. You get a written price up front and our 365-Day Done Right Promise on the completed work. If the repair or install fails within a year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Sunrise Manor
We work on the full Mr-Glass shower enclosure line: the Frameless Sliding Shower Door with its single fixed panel and roller-glide door, the Semi-Frameless Pivot Shower Door, the Bi-Fold Tub Enclosure, and the Custom Neo-Angle and Corner Frameless enclosure. That covers hardware service, glass replacement, full enclosure installs, and conversions. We also handle walk-in shower installation and tub-to-shower conversion where a Mr-Glass enclosure is the finish. Sunrise Manor’s slab-foundation tract homes and older east-side bathrooms are a good fit for these updates, though the summer heat means we schedule glass and sealant work for early morning when temperatures are still manageable.
We Also Service These Brands
Bradford Remodeling Sunrise Manor isn’t dependent on a single brand. Alongside Mr-Glass enclosures, we work with KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures. If your bathroom remodel involves more than the shower, we can coordinate the whole scope with one written price and one guarantee.

FAQs – Mr-Glass Construction Service in Sunrise Manor

No. We’re an independent Mr-Glass service provider, not authorized, affiliated with, or endorsed by the manufacturer. Our credibility comes from pattern recognition across many Mr-Glass installs in the Las Vegas Valley, not from a badge. Call (844) 834-2810 for a free estimate.
We use OEM Mr-Glass roller assemblies, sweeps, and hinge hardware whenever the original profile is still available. When a profile is discontinued, we recommend a quality universal kit that actually matches the track gauge. We source parts per job based on your exact model.
Most hardware repairs on a Mr-Glass enclosure take a few hours once parts are on hand. A full enclosure replacement is typically a one-day install. Custom Neo-Angle units and tub-to-shower conversions take longer because of the tile and glass-to-tile interface work. Call (844) 834-2810 for a specific timeline on your job.
We cover the Frameless Sliding Shower Door, Semi-Frameless Pivot Shower Door, Bi-Fold Tub Enclosure, and Custom Neo-Angle and Corner Frameless enclosure. That includes hardware service, glass replacement, and full installs.
Not when it’s done correctly. We avoid drilling new holes through tempered glass or modifying the frame in ways that void coverage, and we use parts matched to your model. We’ll explain exactly what we’re doing before we start.
Here are the ranges we work from in Sunrise Manor:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
Hardware-only repairs like roller and sweep replacement sit well below those numbers. Call (844) 834-2810 for an exact quote – estimates are free.
Book Your Mr-Glass Service in Sunrise Manor, NV
Whether your Mr-Glass enclosure needs a hardware fix or a full replacement, we’ll give you a written price before any work starts and back it with our 365-Day Done Right Promise. Call (844) 834-2810 to schedule your free estimate in Sunrise Manor.
Written by the team at Bradford Remodeling Sunrise Manor.












