







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The Sunrise Manor Owner’s Guide
Bradford Remodeling installs and repairs Mr-Glass-compatible home additions and ADU systems throughout Sunrise Manor. A permitted home addition here typically runs $45,000 – $130,000 installed, and a detached or attached ADU runs $90,000 – $220,000, with the written price locked before any work starts. We are an independent service provider, not affiliated with Mr-Glass.

Owners usually find the problem the same way. A Mr-Glass addition that has held for years starts showing a hairline crack at a wall-to-ceiling seam, or a door that used to swing true begins to bind in summer and rattle in winter. An ADU occupant reports a soft spot near a threshold after a monsoon. The system didn’t fail all at once; one component moved out of tolerance.
Key Takeaways
- Installed Mr-Glass-compatible additions in Sunrise Manor: $45,000 – $130,000.
- Installed ADU construction: $90,000 – $220,000.
- Garage conversion as an alternate path: $30,000 – $80,000.
- Every Bradford project carries a written price before work starts and the 365-Day Done Right Promise.
- Call (844) 834-2810 for a free estimate; a live person answers 24/7.
Which Mr-Glass Models This Applies To

Mr-Glass shipped additions and modular ADU envelope systems across several product lines, and the component that fits one series rarely fits another. The identifying stamp is usually a small label on the interior face of the frame head, on the exterior trim cap, or inside the electrical chase panel. Look for a series prefix and a width code. If the label is gone, measure the rough opening at three points (top, middle, bottom) and the panel thickness; those three numbers narrow the match fast.
The compatibility gotcha we hit most in Sunrise Manor: a nominal 6-inch wall assembly on paper, but a Mr-Glass panel that measures a true 6⅛-inch. A generic replacement frame built to the nominal size won’t seat, and the gap has to be shimmed or the panel won’t seal against the wind-driven dust we get here. Measure, don’t assume.
On OEM versus aftermarket: OEM Mr-Glass parts give you an exact fit and the manufacturer’s spec sheet. A quality aftermarket equivalent (from a supplier with published dimensional tolerances) can cost less and often ships faster. We’ll give you both, side by side, in writing, and you choose. What we won’t do is guess at a fit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
Here’s what a failing Mr-Glass system actually looks like, and what’s behind each symptom.
- Hairline cracks at wall seams or corners. Caused by differential movement between the addition frame and the main house. In Sunrise Manor’s summer heat cycling, a frame that wasn’t anchored to spec will telegraph that stress into the finish within a few seasons.
- Doors or windows that bind in summer and rattle in winter. Thermal expansion is normal; a component that swings from tight to loose that sharply means the frame or its mounting has shifted. The fix is realignment, not a bigger hinge.
- Water staining or soft spots near a threshold. The flashing or weep path has failed. Sunrise Manor’s monsoon-season rain concentrates at low points, so a small seal breach shows up as a soft substrate before it shows up as a drip.
- Visible gaps, drafts, or dust intrusion at panel joints. The gasket or sealant has aged out. Nevada’s dry heat and UV load shorten sealant life; a seal that would last elsewhere gets brittle here sooner.
- Creaking, popping, or a floor that flexes underfoot. Fastener or subfloor-framing movement. Left alone, a flexing floor stresses the wall connections above it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Sunrise Manor, a Mr-Glass-compatible home addition runs $45,000 – $130,000 installed. ADU construction runs $90,000 – $220,000, and a garage conversion (often the smarter path if you only need the square footage) runs $30,000 – $80,000.
What drives the range: footprint and roofline complexity, foundation work, window and door count, whether permits and engineering are required, and how much finish work you want. Every quote is line-item, materials and labor separated, so you can see the part cost apart from the install.
All completed work is covered by the 365-Day Done Right Promise. If the installation fails within a full year, we come back and correct it at no charge. The written price and the written guarantee are both in your hand before work begins. That’s The Garrison Standard, and it’s non-negotiable on every Bradford job.
DIY or Call Us?
You can safely check a few things yourself: read the label, measure the rough opening at three points, note where the cracks or drafts appear, and photograph it all. Do that before you call and you’ll get a faster, sharper quote.
Where DIY goes wrong on an addition or ADU envelope: structural work and anything involving the building shell. A mis-anchored frame or a bad flashing detail doesn’t fail the day you install it. It fails a season later, and by then the water has been in the substrate. This is load-bearing, weather-tightening work, and it’s the kind of job you want done to spec with a documented permit trail.
Bradford’s technicians have up to 22 years of experience, and every crew member is background-checked and uniformed, so you know exactly who’s on your property. Call (844) 834-2810 and we’ll put a written price in front of you.
FAQs

A properly installed system should hold for decades, but the climate here cuts into that. UV exposure and dry heat break down sealants faster than in milder regions, and monsoon rain finds any flashing weak point. Plan on a seal and flashing inspection every few years.
Often, yes. A binding door or a failed seal is usually a realignment or re-seal job, not a full replacement. Structural cracks or soft substrate are a different story and usually mean component replacement. We’ll tell you which one you’re looking at in writing before any work starts.
A single component repair is typically a day or two. A full Mr-Glass addition or ADU envelope replacement is a multi-week project, and we give you the schedule in the written scope. You’ll never get a “we’ll be there when we get there” from us.
We start with the series label or the three-point measurement, match it to OEM or a spec’d aftermarket equivalent, and present both with published tolerances. Nothing gets ordered on a guess. Call (844) 834-2810 for a free estimate and we’ll confirm the match first.
Bradford also works with KraftMaid, Cambria, and Silestone on the finish side of these builds, so your addition matches your home, not just its footprint.
If your Mr-Glass addition or ADU needs a real answer, call Bradford Remodeling Sunrise Manor at (844) 834-2810 for a free estimate. A live person answers, 24 hours a day. You’ll get a written price, a documented scope, and the 365-Day Done Right Promise in hand before any tool comes out.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












