







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Home Additions & ADU: The Sunrise Manor Owner’s Guide
We plan and build Moen-fixtured home additions and ADUs in Sunrise Manor, and the installed price runs $45,000 – $130,000 depending on square footage, foundation, and utility runs. ADU construction separately runs $90,000 – $220,000 because it adds a full second kitchen, bath, and separate entry. We don’t promise same-day delivery on this work, and neither should anyone else. What you get is a written line-item price before any work starts and a full year of written coverage after it’s done.

Homeowners usually land here after a smaller problem in the new space: a Moen shower cartridge that drips from day one because debris got into the rough-in, a kitchen faucet that loses hot pressure as sediment builds up, or a supply line that starts weeping at a fitting set too tight during pre-drywall plumbing. The fixture is the tell. The real question is what’s going on behind the wall and under the slab.
Key Takeaways
- Moen fixtures are specified into our Sunrise Manor additions and ADUs, and the rough-in work that supports them is checked before the drywall closes.
- Typical installed range for a home addition is $45,000 – $130,000; ADUs run $90,000 – $220,000.
- Written price before work begins, no change orders hiding in the dark, and the 365-Day Done Right Promise on every completed project.
- A live person answers the phone 24/7 at (844) 834-2810.
Which Moen Models This Applies To

Moen’s residential lineup covers more ground than most owners realize, so matching a fixture to the right rough-in matters. On the faucet side, the single-handle kitchen families (MotionSense and the Arbor and Sleek lines) and the widespread and centerset bath families all use standard 1-3/8-inch drillings and 8-inch spread, which is why they slot cleanly into a new vanity or island. The shower side is less forgiving: Moen’s 1222 (single-handle) and 1200/1200B (two-handle) cartridges are not interchangeable, and a Moentrol valve body can’t accept a Posi-Temp cartridge even though the handle looks similar.
To identify what you actually have, pull the trim plate and read the stamped number on the cartridge or the valve body tag. That’s the only reliable path. Faucet aerators unscrew and reveal a model number stamped on the spout underside; shower valves are marked once the handle comes off.
On OEM versus aftermarket: Moen’s own cartridges carry the longest track record, and for Posi-Temp in a rental or an ADU this matters. But a quality brass-bodied aftermarket cartridge from a listed brand (Danco, BrassCraft, and similar) is a reasonable call for a laundry-sink faucet or a guest bath that sees light use. We specify the part in the written scope so you know which you approved. Bradford Remodeling Sunrise Manor is an independent contractor; we’re not affiliated with Moen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Home Additions & ADU Is Failing
- A drip from the shower head that won’t stop. That’s almost always a worn 1222 cartridge seat, and in Sunrise Manor’s water, calcium and silica grit wears the rubber seat faster than the part’s rated life. A steady drip is a cartridge rebuild, not a valve replacement.
- Hot water that comes and goes. A slipping balance spool in a pressure-balancing valve, usually stirred loose by sediment in the hot line. It also means the valve is no longer doing its job of limiting scalding risk.
- Loss of flow at the kitchen faucet. Sediment in the aerator screen (a two-minute check with a wrench) is the first thing to rule out before blaming the cartridge.
- Water weeping at a supply connection. Often a fitting torqued past spec during the original install. This is the one to call on right away, because it can soak a cabinet base and the flooring under it.
- A handle that feels spongy or spins without engaging. The cartridge’s plastic stem is stripping, and continuing to force it usually breaks the stem inside the valve body, which turns a $35 part into a $200+ labor problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Sunrise Manor home addition itself, we quote a written line-item price in the $45,000 – $130,000 range. ADU construction runs $90,000 – $220,000. The range is driven by square footage, whether the foundation is post-tension slab or raised, how far the plumbing has to run from the main, and the finish level (a Moen Posi-Temp shower in tile is one number; a Moen Moentrol system with a hand-held diverter is another).
We quote as one written scope: demolition, rough-in, framing, finishes, fixtures, and the plumbing trim. There is no separate “labor plus parts” invoice that arrives after the fact. The 365-Day Done Right Promise covers every completed project for a full year. If the work fails inside that window, we come back and correct it at no charge.
Fixture brands we specify, and that are documented in your scope, include Moen (primary), plus Kohler, KraftMaid, Cambria, and Silestone where the project calls for them.
DIY or Call Us?
You can safely check a faucet aerator, swap a kitchen faucet’s supply line washers, and confirm that your shower valve is a 1222 by removing the trim plate. That’s the practical DIY line.
Beyond that, a few things get owners into trouble in Sunrise Manor: shutting off a shower valve without a working shutoff at the riser floods a wall cavity, and forcing a seized cartridge in a Posi-Temp body can crack the valve housing itself, which means opening the tile. We don’t give step-by-step instructions for that work, and we don’t recommend it. We’ll tell you plainly when a fifteen-dollar cartridge is a two-hour job, and quote it in writing so there are no surprises. Call (844) 834-2810 for a free estimate.
FAQs

Expect 3 to 8 years in Sunrise Manor before the rubber seat wears or mineral build-up starts sticking the balance spool. The range is wide because the local water is hard enough to shorten the clock on a shower that runs daily, and a guest bath that sees light use can go longer. A written price from us starts with telling you which part you have and when it was installed.
Yes, in most cases. A leaking 1222 or 1200 can be rebuilt with a new cartridge and seat, which is a parts-and-labor job rather than a valve-and-tile job. The honest exception: if the brass body itself is cracked or the internal seats are scored, a rebuild won’t hold, and we’ll say so before quoting. Call (844) 834-2810 for a free estimate.
Plan on 1 to 2 hours for a standard cartridge replacement once we have the correct part in hand, plus time to verify there’s no pressure loss at the valve afterward. If the job turns into a valve-body replacement or tile work, that’s 4 to 8 hours and it goes in the written quote as its own line item.
We match the part number to the model stamped on your cartridge or valve body, then pull it from a documented supplier roster. If it’s a discontinued Moen cartridge, we source the current revision and tell you the change in writing before we install it. You’ll see the exact part and its cost on the written price before any tool comes out.
Yes. A Sunrise Manor addition or ADU that changes the building footprint or adds plumbing fixtures requires permits and inspections, and we pull them as part of the project and pass them. That’s written into your scope, and if a permit fee isn’t on the price, it isn’t in the job. Call (844) 834-2810 for a free estimate.
No. Your price is written before any work begins, and change orders only happen if you ask for a change in scope. If we find hidden rot, a cracked foundation, or plumbing that has to be rerouted, we stop and show you the remediation options before touching anything. Call (844) 834-2810 to schedule your free estimate.
If you’re in Sunrise Manor and a Moen fixture in your new space is dripping, seizing, or losing pressure, don’t let it sit behind tile. Our technicians have up to 22 years of experience, every project is background-checked and uniformed, and a live person answers our phone around the clock. Call Bradford Remodeling Sunrise Manor at (844) 834-2810 for a free estimate on your home addition or ADU, with the price in writing before we start. Every completed project carries the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












