







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The Sunrise Manor Owner’s Guide
KraftMaid windows and doors in Sunrise Manor are sourced and installed by our crews at installed prices of $4,500 – $15,000 for standard window replacement and $8,000 – $25,000 for impact-rated units, with door and window package work quoted in writing before anything ships. We are an independent service provider, not affiliated with KraftMaid, and we match your existing product line by label and measurement rather than by guesswork. Sunrise Manor owners usually discover the failure the same way: a door that stops latching square in July, a sash that fogs between the panes after a wind event, or a hinge that has quietly pulled its screws out of the jamb.

Key Takeaways
- Installed KraftMaid-compatible window replacement in Sunrise Manor runs $4,500 – $15,000; impact-rated units run $8,000 – $25,000.
- Nevada’s high-desert swing, roughly 100°F summer afternoons down to winter nights near freezing, is what kills seals, weatherstripping, and hinge screws around Sunrise Manor.
- You get a written price before work starts and the 365-Day Done Right Promise on the installation: if it fails inside a full year, we return and correct it at no charge.
- A live person answers the phone 24/7. Background-checked, uniformed technicians show up on every job.
Which KraftMaid Models This Applies To

KraftMaid’s window and door program is a cabinetry-line extension, which means the parts fall into families rather than one universal SKU. The most common lines in Sunrise Manor homes are the company’s framed and frameless door styles for interior passage and pantry applications, plus the glazed cabinet door fronts that read as windows in a run of built-ins. Exterior swinging and sliding units are typically sourced through KraftMaid’s partner channels and carry their own labels.
Start with the label. Pull the door or sash and look at the top edge or the hinge-side stile for a manufacturer sticker with a model and a date code. If the label is gone, measure three things: the rough opening width and height to the nearest 1/16 inch, the door slab thickness (1 3/8 inch and 1 3/4 inch are the two standards), and the hinge bore spacing. Those three numbers identify the replacement with far more accuracy than a photograph.
On the OEM-versus-aftermarket call, this is where Sunrise Manor homeowners get burned. KraftMaid-branded hardware and glazing are worth matching when the door is part of a matched kitchen or built-in run, because a mismatched finish will be visible every day. For a standard interior passage door or a plain sash, a quality aftermarket equivalent in the same dimension and hinge pattern performs identically and costs less. We tell you which category your part falls into before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Windows & Doors Is Failing
- The door won’t latch without a lift or a shove. That’s almost always hinge screws that have enlarged their pilot holes in the jamb, a seasonal movement issue that shows up hard in Sunrise Manor when summer heat dries the frame and winter moisture swells it back.
- Fogging or condensation between the panes. The sealed glazing unit has lost its desiccant seal. Once moisture is inside the unit, no cleaning or resealing on your side will fix it; the insulated glass unit needs replacement.
- Weatherstripping that’s flat, cracked, or peeling away. UV exposure around Sunrise Manor cooks the foam and bulb seals within a few years, and the first symptom owners notice is dust on the sill or a whistle at the gap on a windy day.
- The sash drags or binds in the frame. Frame racking from settling, or a swollen wood stile absorbing moisture, both cause this. Left alone, the drag turns into a cracked stile or a torn hinge.
- Visible rot or soft spots at the bottom rail or sill. Water pooling at the sill is the leading cause of door failure in this climate, and by the time you can press a screwdriver into the wood, the damage has usually spread into the framing.
Replacement Cost & What’s Included

Here’s what installed work runs in Sunrise Manor, priced as parts plus labor in a single written number:
| Work | Installed Price Range |
|---|---|
| Window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
The low end covers standard-size units in a straightforward opening with existing trim reused. The high end covers impact-rated glazing, custom sizes, multiple units, and frame or sill repair found once the old unit comes out. Sunrise Manor’s wind-driven dust and summer heat push many owners toward impact-rated glass on west and south exposures, and that choice alone moves the number toward the top of the range.
What drives the spread is glazing type, unit count, size, and what’s behind the wall. You get a written line-item price before any work starts, we pull the permits the work requires, and the 365-Day Done Right Promise covers the installation for a full year: if it fails inside that window, we come back and correct it at no charge. We also work with Cambria, Silestone, and Kohler on the surrounding remodel when a window or door replacement turns into a bigger project.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely do a few things. Check and tighten hinge screws, replace weatherstripping, clean and lubricate tracks and hinges, and confirm the label and measurements before ordering a part. Those are low-risk and worth doing first.
Where DIY goes wrong on this part is the installation itself. Exterior door and window swaps involve removing the old unit without damaging the rough opening, setting flashing correctly, and getting the sill pan right so water sheds instead of pooling. A missed flashing detail around Sunrise Manor shows up as rot two seasons later, not next week. Impact-rated units and anything that changes the rough opening or penetrates exterior sheathing are not a weekend job. If you’re not sure which category you’re in, call (844) 834-2810 and we’ll tell you straight.
FAQs

How long do KraftMaid windows and doors last in Sunrise Manor? A well-installed exterior unit typically gives 15 – 20 years here before the sealed glass unit or the weatherstripping needs attention, and interior doors can last far longer. The failure that comes first in this climate is the glazing seal and the weatherstripping, both hit hard by UV and the summer-to-winter swing. Call (844) 834-2810 for a written estimate on yours.
Can it be repaired instead of replaced? Often, yes. A dragging hinge, flat weatherstripping, and a misaligned strike plate are all repair items, and a fogged insulated glass unit can sometimes be swapped without replacing the whole sash. Structural rot at the sill or a racked frame usually means replacement. We’ll tell you which one you’re looking at, in writing, before any work starts.
How long does the swap take? A single window or door replacement is typically a one-day job once the part is on site; a multi-unit package runs two to three days. Custom sizes and impact-rated glazing add lead time on the part itself. Call (844) 834-2810 for a schedule that matches your part.
How do you source the part? We identify your KraftMaid product by label and measurement, then source either the OEM component or a documented aftermarket equivalent, and we tell you which one and why before you commit. No part is carried on a truck; everything is ordered to your unit. Our technicians have up to 22 years of experience with this work.
Get Your KraftMaid Windows & Doors Priced in Sunrise Manor
If your KraftMaid window or door in Sunrise Manor is fogging, dragging, or letting in dust, call Bradford Remodeling Sunrise Manor at (844) 834-2810 for a free estimate. You get a written price before any work starts, a live person on the phone any hour, and the 365-Day Done Right Promise behind the installation for a full year. We’ll identify your part, tell you OEM versus aftermarket, and put the number in writing before a tool comes out.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












