







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Driveway & Pavers: The Sunrise Manor Owner’s Guide
Homeowners in Sunrise Manor searching for “KraftMaid driveway & pavers” are usually chasing a part number on a hinge, a bracket, or a paver-related fitting tied to a KraftMaid installation. Our technicians have up to 22 years of experience and match KraftMaid-compatible components to the right model, with paver driveway installation in Sunrise Manor running $7,000 – $18,000 installed. You’ll know the part is failing when you see movement at a joint, a bracket that won’t hold, or a paver that has shifted away from the driveway edge.

Sunrise Manor sits on soil that expands and contracts with the desert swing between hot afternoons and cool nights, and driveway hardware takes the brunt of it. The symptom usually shows up as a loose fitting, a gap that opens seasonally, or a fastener that backs out after a few summer cycles.
Key Takeaways
- KraftMaid-compatible driveway and paver components are matched by model, not guessed.
- Installed paver driveway pricing in Sunrise Manor runs $7,000 – $18,000.
- We’re an independent service provider and not affiliated with KraftMaid.
- Every project gets a written price before work starts and the 365-Day Done Right Promise.
Which KraftMaid Models This Applies To

KraftMaid cabinetry lines share hardware families across series, and the driveway and paver fittings we see in Sunrise Manor are typically specified by the installer who set the original exterior package. If you’re trying to identify the right part, start with the label inside the nearest cabinet door: KraftMaid prints the series and finish code there, and that label is the fastest way to confirm compatibility before you order. Model lines fall into broad families, and a fitting that works on one won’t necessarily seat on another.
Measure twice before you order. Take the fastener diameter, the bracket thickness, and the distance between mounting holes. A 1/16-inch difference in hole spacing is enough to send a part back, and Sunrise Manor homeowners regularly discover this the hard way when a “close enough” replacement won’t seat.
The OEM-versus-aftermarket decision depends on what failed. Original KraftMaid parts carry the manufacturer’s specification, which matters for anything structural. Quality aftermarket equivalents are fine for cosmetic fittings and often cost less. We source both, and we’ll tell you plainly which one your situation calls for before you spend a dollar.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Driveway & Pavers Is Failing
- A bracket that won’t stay tight. The fastener has stripped the pilot hole or the metal has fatigued. Once the hole is oversized, tightening it again just delays the failure.
- A paver that rocks underfoot. The base beneath it has settled, usually from irrigation runoff or the soil movement common across Sunrise Manor. A rocking paver grinds the ones beside it.
- A gap that opens and closes with the seasons. Thermal expansion in desert heat causes this. If the gap stays open after a cool night, the joint has lost its filler.
- Rust or corrosion at the fitting. Sprinkler overspray and monsoon moisture attack exposed metal fasteners. Corrosion weakens the part long before it visibly fails.
- A visible crack in the paver itself. Point loading from a vehicle tire or a shifted base causes this. Once cracked, the paver won’t hold its original position.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Replacement costs in Sunrise Manor depend on the scope. A single fitting swap is a small line item, while full paver driveway installation runs $7,000 – $18,000 and driveway sealing runs $250 – $700. Paver patio installation, if the failing pavers are tied to a shared base, runs $3,500 – $11,000. What drives the range is the base condition, not the part itself.
Our pricing is written before any work starts, every time, with no numbers that move at the door. Parts and labor are listed separately so you can see what you’re paying for. Every completed project carries the 365-Day Done Right Promise: if the work fails inside a full year, we return and correct it at no charge. We work with a documented roster of name-brand materials, including Belgard hardscaping alongside Cambria, Silestone, and Kohler on interior projects.
DIY or Call Us?
You can safely check a few things yourself. Look at the label inside the nearest KraftMaid cabinet to confirm your series. Measure the fastener and hole spacing. Note whether the paver moves when you step on it. That information helps us quote accurately.
Where DIY goes wrong is the base work. Replacing a paver or resetting a bracket without correcting the substrate underneath just re-fails in a season, and lifting pavers without proper base prep can damage adjacent pieces. Call (844) 834-2810 and we’ll schedule your free estimate.
FAQs

How long does a KraftMaid-compatible paver fitting last in Sunrise Manor? Expect 8 – 15 years for quality fittings in this climate, shorter if sprinkler overspray hits the metal. Desert heat and monsoon moisture both shorten the lifespan. Call (844) 834-2810 for an exact quote – estimates are free.
Can a failing paver or bracket be repaired instead of replaced? Sometimes, yes. A tight joint or re-seated fastener can often be corrected without a full swap. The deciding factor is whether the base beneath it is still sound. Call (844) 834-2810 to schedule your free estimate.
How long does the swap take? A single fitting swap is typically a few hours. Full paver driveway work runs one to three days depending on base condition and weather. We’ll give you the timeline in writing before work starts. Call (844) 834-2810 for your free estimate.
How do you source the KraftMaid-compatible part? We match by model and specification from documented manufacturers, and we tell you upfront whether an OEM part or a quality aftermarket equivalent is the right call. We don’t carry stock or parts on a truck, so we source to the confirmed model. Call (844) 834-2810 to schedule your free estimate.
When you’re ready to get the part squared away, call Bradford Remodeling Sunrise Manor at (844) 834-2810 for a free estimate. We’ll put the price in writing, answer the phone with a real person 24/7, and hand you a signed guarantee when the job closes. A live person picks up every time.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












