







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The Sunrise Manor Owner’s Guide
If you’re planning a Kohler-spec’d addition or ADU on an existing Sunrise Manor home, our installed range runs $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU build, with Kohler fixtures and finish hardware written into the scope, not swapped in later. We work with Kohler as an independent contractor – we’re not affiliated with Kohler, we specify their products because the specs and warranties are traceable. Most Sunrise Manor owners don’t “discover a failed part” here; they discover their existing rough-in, drain line, or valve body won’t accept the Kohler fixture they want, usually after a plumber or a showroom quote surfaces the mismatch.

Which Kohler Models This Applies To
Kohler doesn’t sell “additions” or “ADUs” as a product line, so what actually matters is the fixture and finish schedule that goes into the build: Kohler toilets (Santa Rosa, Wellworth, Memoirs), shower valves (Rite-Temp pressure-balancing cartridges fit a wide family of Kohler trim), and freestanding tubs. The compatibility gotcha is at the rough-in. A Kohler Rite-Temp valve body needs a specific rough-in depth and the rough-in must be set before drywall; if your addition is framed around a different brand’s valve body, the Kohler trim won’t seat. Identify what you have by pulling the trim plate – the cartridge orientation and the stamped series code on the valve body tell you what fits. On the OEM-vs-aftermarket decision: for shower cartridges and flush valves, a genuine Kohler replacement matches the wear surface tolerances the original was built to; a cheap aftermarket equivalent often fits but gives you a shorter service window. We specify genuine Kohler on additions because the manufacturer warranty passes through to you, which matters on a five-figure build.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Home Additions & ADU Is Failing
On an existing Sunrise Manor home, the “failure” isn’t the addition – it’s the fixture and rough-in work the addition depends on. Here’s what we see:
- Shower valve cartridge drips or runs hard to turn. Mineral scale in Sunrise Manor’s hard water wears the cartridge seat; the valve body is usually fine, the cartridge isn’t.
- Toilet runs or refills on its own. A failed fill valve or flapper in a Kohler Wellworth or Santa Rosa – common after 6 – 10 years in our water.
- Freestanding tub drain won’t align with the new floor. The drain rough-in in the original slab doesn’t match the Kohler tub’s overflow position; needs a re-rough before tile.
- Existing drain line sizes won’t accept a Kohler fixture. Older Sunrise Manor plumbing sometimes runs a smaller drain than the Kohler spec calls for; it has to be opened up before you frame the addition.
- Soffit or wall penetration shows moisture at the exhaust/vent tie-in. Kohler fixtures needing a vented wall means the addition’s vent path has to be planned, not retrofitted.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Home addition in Sunrise Manor: $45,000 – $130,000. ADU construction: $90,000 – $220,000. Garage conversion (a common ADU path here): $30,000 – $80,000. The range is driven by square footage, whether the addition needs a new slab or matches an existing one, and how much Kohler fixture and finish work is in the schedule. Parts-plus-labor is broken out line by line: fixtures, rough-in plumbing, framing, finishes, permits. Every project gets a written price before any work starts, and all completed work is covered by the 365-Day Done Right Promise – if it doesn’t hold within the year, we return and correct it at no charge. Permits are pulled and inspections passed as part of the scope.
DIY or Call Us?
What a homeowner can safely check: pull the Kohler trim plate to read the cartridge series, check the toilet fill and flapper, and confirm the rough-in depth against the fixture spec sheet. Where DIY goes wrong: re-roughing a drain line or moving a valve body in an existing wall or slab. That’s not a parts swap – it’s plumbing behind a wall you’ll be living with for decades, and a bad rough-in means torn-out tile. We’d rather you check the trim plate, then call us for the rough-in work. Our technicians have up to 22 years of experience with this kind of retro-fit spec work. Call (844) 834-2810 for a free estimate – a written price before any tool comes out.
FAQs

Expect 6 – 10 years on a shower cartridge and 8 – 12 on a toilet fill valve in Sunrise Manor’s hard water – shorter than the fixture’s rated life because our water wears the wear surface faster. Budget for the cartridge, not the whole valve body. Call (844) 834-2810 for an exact quote – estimates are free.
Usually yes on a cartridge seat or a flapper; no on a cracked valve body. We’ll tell you which when we’re on site. Call (844) 834-2810 – estimates are free.
Trim and cartridge swap: an hour or two. Valve body replacement means opening the wall: a half-day to a full day. Rough-in work on an addition runs with the framing schedule. Call (844) 834-2810 to get it on the calendar.
We order genuine Kohler replacement parts against the model or series code – we don’t carry parts on a truck, so we order what your fixture actually needs. The manufacturer warranty passes through to you. Call (844) 834-2810 to confirm fit before we order.
We also install and service KraftMaid, Cambria, and Silestone finishes alongside Kohler on Sunrise Manor additions. Call (844) 834-2810 to schedule your free estimate – a live person answers, every time.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












