







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Sunrise Manor Owner’s Guide
Jerith-compatible kitchen remodeling in Sunrise Manor runs $14,000 – $45,000 installed, with small kitchen remodels at $9,000 – $20,000, and the work is planned around your schedule rather than promised same-day. Kitchens get torn open and rebuilt, so the honest answer is that no one replaces a Jerith system in an afternoon. Owners in Sunrise Manor usually find out something failed the same way: a drawer front that suddenly sits proud of the frame, a cabinet box that no longer closes square, or a run of doors that has gone out of alignment against the wall after a summer of triple-digit heat.

We’re Bradford Remodeling Sunrise Manor, an independent remodeling contractor. We are not affiliated with Jerith, and we don’t claim to be. What we do is match the correct Jerith-series parts and cabinetry components to your existing kitchen, install them to spec, and hand you a written price and a written guarantee before a single tool comes out. Estimates are free.
Key Takeaways
- Installed Jerith-compatible kitchen remodeling in Sunrise Manor: $14,000 – $45,000.
- Small kitchen remodels: $9,000 – $20,000. Cabinet installation alone: $4,000 – $13,000.
- Component failure in Nevada is most often heat-and-dry-air related, not a bad part from the factory.
- We put the price in writing before work starts, and every completed job carries the 365-Day Done Right Promise.
Which Jerith Models This Applies To

Jerith cabinetry and kitchen components have been built across several series and door profiles over the years, and the parts are not interchangeable between them. A door hinge drilled for one series won’t seat in another without re-boring the frame, and drawer boxes vary in depth and slide style. Before we order anything, we identify what’s actually in your kitchen: the series label, usually on the inside of a cabinet door or on the back panel of a base cabinet, plus the drawer box dimensions and the hinge pattern. If the label is gone, we measure the frame opening, the overlay, and the slide mount locations and match those to the correct part.
That OEM-versus-aftermarket decision matters here. A genuine Jerith replacement part gets you an exact fit and the original finish. A quality aftermarket equivalent, such as a compatible hinge or slide from a documented hardware line, can be a better value when the OEM part is discontinued or back-ordered, as long as the spec matches. We’ll tell you which is which and price both, so you’re not guessing. We don’t keep parts in stock and nothing rides on a truck; every part is sourced to your specific kitchen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Kitchen Remodeling Is Failing
- Doors that won’t stay aligned. Over time, or after a dry Nevada summer, hinges loosen from the frame and the door drops. The cause is usually the hinge plate losing grip in the wood, not the hinge itself failing.
- Drawers that stick or grind. Slides wear or the cabinet box has shifted slightly out of square. In Sunrise Manor, the seasonal swing between dry heat and cooler months is enough to make a box move.
- Swollen or separated cabinet boxes. Moisture near the sink or a leaking rough-in swells the particleboard or MDF. Once the substrate swells, replacement is the honest fix; patching won’t hold.
- Peeling or faded finish. Cabinet faces take direct sun and dry air, and finishes break down at the edges first. It’s a finish problem, but it often signals the whole run needs attention.
- Sagging shelves or cracked frames. Load-bearing shelves and cabinet frames crack when the material has aged past its service life, which shows up most often in the older series.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Jerith-compatible kitchen remodeling in Sunrise Manor:
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves with the number of cabinets, whether you’re replacing boxes or just doors and hardware, the countertop material, and how much plumbing or electrical rough-in has to be reworked. Your written price is itemized, parts and labor shown separately, and it doesn’t move at the door. Every completed job is covered by the 365-Day Done Right Promise: if the work fails within the year, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely check a few things: open every door and drawer and note which ones stick, look under the sink for staining or swelling, and snap a photo of the series label. That information helps us quote accurately. Where DIY goes wrong is re-boring hinges into a swollen or delaminated frame, or trying to square a cabinet box that’s already moved; you end up chasing alignment problems and damaging the substrate. Kitchen electrical and plumbing rough-in belong with a trained professional, not a weekend project. If your Jerith kitchen needs parts matched and installed, call (844) 834-2810 for a free estimate.
FAQs

Expect 10 to 15 years from hinges and slides and longer from solid cabinet boxes, but the dry Nevada climate shortens that. Seasonal heat and low humidity stress finishes and hardware faster than in coastal markets. Call (844) 834-2810 and we’ll assess what’s left in your kitchen’s service life.
Sometimes. A loose hinge can often be re-seated and a worn slide swapped without touching the cabinet. A swollen box or cracked frame can’t be repaired reliably and needs replacement. We’ll tell you which you’re looking at.
A single drawer or door set takes an hour or two; a full cabinet run or kitchen remodel spans several days depending on scope and countertop lead times. You’ll get the schedule in writing. Call (844) 834-2810 for a realistic timeline on your kitchen.
We match your series and spec first, then source the OEM part or a documented compatible equivalent, whichever fits and prices better. You’ll see both options in your written quote. Estimates are free, so call (844) 834-2810.
If a Jerith cabinet, hinge, or drawer slide in your Sunrise Manor kitchen has failed, don’t guess at the part or the price. Call Bradford Remodeling Sunrise Manor at (844) 834-2810 for a free estimate. Every price comes in writing before work starts, every completed project carries the 365-Day Done Right Promise, and a live person answers the phone 24/7. We also work with KraftMaid, Cambria, and Silestone when your kitchen calls for a different line.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












