A Bradford company - serving Sunrise Manor, NV
An open living room and dining area after a whole-home remodel
E
ES Windows · Sunrise Manor

ES Windows Windows & Doors in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A finished backyard cottage with a small covered porch
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Windows & Doors: The Sunrise Manor Owner’s Guide

We install ES Windows-compatible windows and doors for Sunrise Manor homeowners, and a typical full window replacement runs $4,500-$15,000 installed, while impact-rated units run $8,000-$25,000. A single failed component, like a balance, a swept hinge, or a glazing bead gasket, is usually a repair rather than a full replacement. We’re an independent service provider and not affiliated with ES Windows, so we match parts to your actual unit rather than assuming every ES Windows product in Sunrise Manor uses the same hardware.

professional home remodeling service in Sunrise Manor, NV

Call (844) 834-2810

Most owners find out something is wrong the same way: a window that won’t stay up in the afternoon heat, a door that drags on the threshold by July, or a gasket that crumbles into the track when they vacuum. Sunrise Manor sits in the Mojave, where summer highs push past 110°F and winter nights dip near freezing. That swing is hard on vinyl, gaskets, and weatherstripping, and it’s usually the reason a part gives out before the rest of the unit does.

Which ES Windows Models This Applies To

A remodeled primary suite with built-in wardrobes and a window seat

ES Windows is a Nevada-based manufacturer, and its product lines have changed over the years, so the part that fits one Sunrise Manor home often won’t fit the one next door. The first step is identifying what you actually have. Check the glass for an etched label or a manufacturer sticker tucked in the frame reveal, and look at the top or side of the sash for a model mark. Older ES Windows lines and newer energy-code-driven units can use different balance systems, different sash weights, and different locking hardware even when the frame dimensions look identical.

Measure carefully before ordering anything. Record the visible glass width and height, the frame width and height, and the depth of the pocket the sash sits in. On ES Windows sliding units especially, the roller assembly and the track profile changed between production runs, and a roller that’s a millimeter off will bind. That’s the compatibility gotcha we see most often in Sunrise Manor.

Then make the OEM-versus-aftermarket call. OEM parts give you an exact fit and match the original warranty spec. Quality aftermarket equivalents – glazing gaskets, weatherstripping, rollers – can cost meaningfully less and perform fine, as long as the spec matches. For structural hardware and anything load-bearing, we lean OEM. For seals and trim, aftermarket is often the sensible choice. We don’t stock parts and we don’t carry them on a truck; we source the correct part for your unit, which is why the identification step matters so much.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Windows & Doors Is Failing

  • The window won’t stay open. A failed balance or a snapped balance cord is the usual cause. In Sunrise Manor heat, vinyl and the balance housing expand and contract, and worn balances lose their tension faster than in milder climates.
  • The sash drags or sticks in the track. This is usually worn rollers or a gasket that’s swollen and flattened after years of desert sun. Left long enough, the sash can jump the track and crack the frame.
  • You feel hot air at the edges in summer. Crumbling weatherstripping or a compressed gasket lets conditioned air escape and heat seep in. That shows up as a higher power bill before you ever see daylight through the seam.
  • The door drags on the threshold or won’t latch. Hinge wear or a settled frame is the common cause. Threshold drag grinds the door bottom and eventually warps the slab.
  • Fogging or condensation between the panes. A failed seal on a dual-pane unit lets moisture in, and once the desiccant is spent, the glass is the part that has to be replaced. No gasket fix solves this one.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled kitchen with a waterfall island and wood cabinets

For Sunrise Manor, window replacement runs $4,500-$15,000 installed for a typical home, and impact window installation runs $8,000-$25,000 where impact-rated glass is the goal. A single failed part – a balance, a set of rollers, a door sweep, weatherstripping – is a much smaller line item than a full replacement, and the exact price depends on the part, the unit, and how many you need done. We give you a written price before any work starts, and that price doesn’t move at the door.

What drives the range: unit size and count, glazing type, whether the frame is sound or needs work, and whether you’re matching an older ES Windows profile. Our written quote is line-item, so you see parts and labor separately. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge. We also service KraftMaid, Cambria, and Silestone products for Sunrise Manor homeowners working through a wider remodel.

DIY or Call Us?

You can safely do the identification work yourself. Read the label on the glass, measure the glass and frame dimensions, photograph the failed part next to a tape measure, and check whether the sash is square in the frame. That information is what makes a correct part match possible, and most owners can gather it in ten minutes.

Where it goes wrong: forcing a swollen sash back into a track, prying a balance housing, or replacing dual-pane glass yourself. A window sash is heavy and can drop without warning, and a failed seal on the glass means the whole insulated unit has to come out, not something you can patch. There’s no high-tension spring here to respect, but a dropped sash and cut glass are real hazards. If the unit is fogged, dragging hard, or a balance has snapped, that’s the point to call. Call (844) 834-2810 and we’ll talk through what you’re seeing before you spend a dollar.

FAQs

A wood double vanity with two mirrors after a bathroom remodel

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A powder room with botanical wallpaper and a stone sinkAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in niche

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 834-2810
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Bradford Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch