







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Kitchen Remodeling: The Sunrise Manor Owner’s Guide
Cover-compatible kitchen remodeling in Sunrise Manor typically runs $14,000 – $45,000 installed, with a small kitchen remodel landing between $9,000 and $20,000. We install to Cover’s kitchen specification using documented, name-brand materials, and we put the full written price in your hands before a single cabinet comes off the wall. Owners usually find out something is wrong the same way: a cabinet door that won’t sit flush at the hinge, a countertop seam that’s started to move, or a backsplash tile that lifted after one Las Vegas Valley summer. That’s when the calls come in.

Key Takeaways
- Cover kitchens here price at $14,000 – $45,000 installed; small kitchens at $9,000 – $20,000.
- We’re an independent contractor. Bradford Remodeling Sunrise Manor is not affiliated with Cover.
- Every project gets a written price before work starts and the 365-Day Done Right Promise in writing at close.
- Our technicians have up to 22 years of experience with kitchen specification work.
Which Cover Models This Applies To

Cover builds its kitchen cabinetry to a set of standard box dimensions and door overlay specifications, and the specification your part has to match is printed on the label inside the cabinet door or on the back of the drawer box. Find that label before you order anything. The overlay number matters most: Cover full-overlay doors and partial-overlay doors use different hinges and different drawer-front spacing, and a hinge matched to the wrong overlay shows up as a door that rubs the frame or a gap that won’t close.
Measure, don’t assume. Box width and height, door thickness, and the hinge cup bore diameter all have to agree. On the countertop side, Cover’s surface panels are cut to a specified depth, and a replacement slab cut to a generic 25-inch depth instead of the Cover depth leaves an overhang that looks wrong at the sink.
The OEM-versus-aftermarket call is straightforward. For hinges, drawer slides, and shelf pins, a quality aftermarket equivalent is fine and often cheaper; the spec is dimensional, not proprietary. For door fronts, panels, and anything with a finish match, go OEM or go through a fabricator who can match the Cover finish sample. KraftMaid, Cambria, and Silestone are the names we work with most on Cover-compatible upgrades, and every one of them publishes specs you can check against the label.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Kitchen Remodeling Is Failing
Five symptoms we see repeatedly in Sunrise Manor kitchens, and what’s actually behind each one:
- Cabinet doors that won’t stay shut or drag on the frame. The hinge has lost tension or the overlay spec no longer matches the door. In our climate, the bigger cause is usually seasonal wood movement, not the hinge itself.
- Countertop seams that have opened up. Seam adhesive has failed, often because the substrate under the counter moved. A spot repair over a moving substrate fails again within a season.
- Backsplash tile lifting at the top edge. The thinset lost its bond, frequently because the drywall behind it picked up moisture or the tile went up over a surface that wasn’t prepped. Cover finishes expect a properly prepped substrate, and skipping that step is the most common shortcut we find.
- Drawer slides that grind or stick halfway. The slide is worn, or the drawer box is out of square because the cabinet frame shifted. Slide replacement on a racked box just wears the new slide out faster.
- Water staining under the sink or along the countertop back edge. A failed caulk line or a slow supply fitting leak. This one gets worse quietly and needs attention before the cabinet bottom softens.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what kitchen work runs in Sunrise Manor, priced by line item so you can see exactly what you’re paying for:
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves you up the range: cabinet box count, whether the layout changes (which means plumbing and electrical rough-in), surface material choice, and whether the substrate under the counter has to be rebuilt. What doesn’t move: the price we quote in writing. Every project includes the parts, the labor, permits where required, and cleanup to a clean site at close, and the whole thing carries the 365-Day Done Right Promise. If the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: open the cabinet doors and read the label, measure the door overlay and hinge bore, and look under the sink with a flashlight for staining or a slow drip. Write those numbers down before you call anyone, because they’re what makes the price accurate.
Where DIY goes wrong is the physical work. Hanging a cabinet out of level throws every door and drawer off, and a homeowner re-hanging a heavy upper cabinet on a wall that isn’t anchored for it is a real injury risk. Countertop work involves cutting and lifting stone slabs that weigh more than two people should carry, and setting a seam wrong is not something you fix after the fact. Our technicians have up to 22 years of experience with this exact work, and they’re background-checked and uniformed so you know who’s in your home.
If you’re not sure whether it’s a part or a bigger problem, call (844) 834-2810 and we’ll tell you straight.
FAQs

Cabinet boxes and door fronts typically hold 15 to 20 years when the substrate behind them stays dry; hinges and drawer slides are the wear items and usually need attention at the 8 to 12-year mark. The desert heat and low humidity here dry wood out and loosen joints faster than in a humid climate, so hardware tends to fail sooner than the wood itself.
Often yes, and we’ll say so. Hardware like hinges, slides, and shelf pins is a straight swap; a single lifted tile or an opened seam can sometimes be corrected if the substrate is sound. The test is the substrate: if what’s behind the part has moved or gotten wet, a repair over it fails again, and replacing the part is the honest answer.
A hardware swap or backsplash section is usually a same-day job. A cabinet installation runs two to four days, and a full kitchen remodel runs several weeks depending on scope and whether the layout changes. We give you the schedule in writing with the price, before work starts.
We work from the label and measurements inside your cabinets, match them to the Cover specification, and source through our documented brand roster and manufacturer channels. We don’t carry parts on a truck and we don’t claim to stock Cover parts locally, so we confirm the exact part and its price before ordering anything, and you see that number in writing first.
Call (844) 834-2810 to schedule your free estimate. A live person answers 24 hours a day, 7 days a week, and you’ll get a written price range for your Sunrise Manor kitchen before any work begins. Our technicians have up to 22 years of experience, and every completed project carries the 365-Day Done Right Promise in a signed written guarantee you hold at close.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












