







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunrise Manor Homeowners Choose CGI Construction
Bradford Remodeling Sunrise Manor provides independent construction and remodeling service around CGI products: CGI kitchen cabinetry, CGI quartz countertops, CGI bath vanities, and CGI roofing components. What sets our CGI work apart is field experience with the specific failure modes these products develop in Sunrise Manor homes, and a written price before work starts. We are an independent provider with no affiliation with or authorization from CGI. Call (844) 834-2810 and a live person picks up, day or night.

Why Trust Bradford Remodeling Sunrise Manor for Your CGI Construction?

Our technicians have up to 22 years of experience, and a good share of that has been spent on CGI cabinetry and quartz in the Las Vegas Valley. They know the difference between a framed CGI line and a frameless one before the doors come off, and they know where the hardware on each tends to fail first. That matters when a hinge screw has already stripped once and you don’t want it stripped twice.
We use OEM-spec parts where they’re the right answer, and quality aftermarket components where the original design is the weak point. Warranty-safe practice is standard: we don’t drill, cut, or seal in ways that void a manufacturer’s coverage, and we document what we did so your paperwork holds up. Every project gets a written price before any work begins and the 365-Day Done Right Promise, a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge. That’s The Garrison Standard in practice. Bradford Remodeling is part of the Garrison Partners family, established in 2004, independently owned and operated.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Sunrise Manor
These are the CGI issues we see most often in Sunrise Manor, and what actually causes them.
- Sagging cabinet doors and misaligned drawers. Hinge screws pull loose from the particleboard or MDF stiles on CGI Kitchen Cabinetry, both framed and frameless lines. Desert dryness plus daily use accelerates it: the screw hole walls crumble and the door drops. The fix is usually sturdier hardware set into repaired or reinforced stiles, not new cabinets.
- Quartz seams separating or edges chipping. CGI Quartz Countertops develop open seams and chips when the adhesive was applied over a substrate that flexes, or when the seam sat where a heavy appliance lands. A dishwasher or wall oven pushing on an under-supported span will open a seam over a season or two.
- Vanity finish blistering near the sink. CGI Bath Vanities peel and blister at the front edge and around the basin when water sits on the finish. In Sunrise Manor’s low humidity the wood body dries and pulls while the wet zone swells, and the finish lifts at that seam.
- Roof flashing and trim loosening at penetrations. CGI Roofing Components, the flashing, underlayment, and trim, corrode or work loose around vents, skylights, and wall junctions. Intense UV breaks down sealant, and the first monsoon downpour finds the gap. That’s a leak at the penetration, not a failed roof.
- Cracked or separated cabinet boxes at the joints. Frameless CGI boxes can split at the corner fasteners when a loaded cabinet is dragged or when the wall behind it moves. Repairable with proper clamping and fasteners in most cases.
A typical sequence on the cabinet side: a homeowner in Sunrise Manor notices one door hanging low, then a drawer that won’t close flush. The hinge screws have stripped out of the MDF stiles, sped along by dry air and daily use. A qualified local pro inspects every hinge and slide, swaps the damaged hardware for sturdier components, and repairs or reinforces the frame as needed. Most of these resolve without replacing the cabinets.
CGI Parts & Our Repair-vs-Replace Approach

On cabinet hardware we use OEM-spec hinges and slides when they’re available, but we often steer toward high-quality aftermarket replacements that outlast the originals. For countertop and vanity work we source matching quartz and finishes from reputable suppliers so the repair blends. We don’t claim to hold local stock of CGI parts; each job is sourced to the specific product and model.
Repair versus replace is an honest call based on age and condition, not on what’s easier to sell. A five-year-old CGI quartz top with one chipped edge gets repaired. A fifteen-year-old top with a failed substrate and three open seams usually doesn’t. We tell you which one you’re looking at, in writing. Call (844) 834-2810 for a free estimate and a straight answer.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We identify the exact CGI line and model, check the hardware, substrate, and seals, and photograph what we find so the written scope matches reality.
- 2
Written price and repair-vs-replace call. You get the number before any work starts, along with our recommendation on repair or replacement and why.
- 3
Repair or install. Hardware swaps, seam repair, flashing replacement, or full cabinet and countertop installation, done in sequence so we’re not working over finished surfaces.
- 4
Test. Doors and drawers cycled and aligned, seams checked, water run at the vanity, and flashing checked before we call it done.
- 5
Warranty handoff. You get the signed 365-Day Done Right Promise in hand, a clean site, and documentation of what was replaced.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Sunrise Manor
We work on CGI Kitchen Cabinetry in both framed and frameless lines, including door and drawer replacement, hardware upgrades, and full installation. We handle CGI Quartz Countertops, from seam and chip repair to complete fabrication and install over a properly prepped substrate. CGI Bath Vanities get finish repair, top replacement, and full install. CGI Roofing Components, meaning flashing, underlayment, and trim, we repair and replace at penetrations where leaks start. If you’re not sure which line you have, we can usually tell from the door style and box construction.
We Also Service These Brands
Bradford Remodeling Sunrise Manor works across brands, not just one. Alongside CGI we install and service KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, and Kohler fixtures, among others. That means when a CGI part is discontinued or a different brand is the better fit, we’re not stuck. You get the honest option, in writing.
FAQs – CGI Construction Service in Sunrise Manor

No. We are an independent service provider with no affiliation with or authorization from CGI. We work on CGI products because we know them, not because the manufacturer endorses us. Call (844) 834-2810 for a free estimate.
We use OEM-spec CGI parts when they’re available and are the right fix, and quality aftermarket components when they outlast the original design. We’ll tell you which we’re using and why before work starts. Call (844) 834-2810 for a free estimate.
Hardware and alignment work on CGI cabinets is often a half-day. Countertop seam repair runs a few hours plus cure time. A full cabinet or countertop install takes longer and depends on fabrication and the condition of the substrate. You get a written timeline with the written price. Call (844) 834-2810 for a free estimate.
CGI Kitchen Cabinetry in framed and frameless lines, CGI Quartz Countertops, CGI Bath Vanities, and CGI Roofing Components including flashing, underlayment, and trim. If you’re unsure of your line, we can identify it on site. Call (844) 834-2810 for a free estimate.
Not when it’s done correctly. We follow warranty-safe practice, avoid modifications that void manufacturer coverage, and document the work so your paperwork holds up. Call (844) 834-2810 for a free estimate.
Here are the market ranges for the CGI-related work we do most in Sunrise Manor.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Remodel | $9,000 – $28,000 |
Call (844) 834-2810 for an exact quote. Estimates are free and the price is written before work starts.
Book Your CGI Service in Sunrise Manor, NV
Whether it’s a sagging CGI cabinet door, a separating quartz seam, or flashing that’s leaking at a penetration, we’ll give you a written price before any work begins, back it with the 365-Day Done Right Promise, and leave the site squared away. Call Bradford Remodeling Sunrise Manor at (844) 834-2810 for a free estimate.
Written by the team at Bradford Remodeling Sunrise Manor.












