







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The Sunrise Manor Owner’s Guide
We install and replace CGI-compatible windows and doors in Sunrise Manor, and window replacement here typically runs $4,500 – $15,000 for a whole-house package, with impact-rated installation in the $8,000 – $25,000 range. A single failed unit is usually a far smaller job, priced as a line item. CGI is a common builder-grade line in Sunrise Manor’s tract homes, so the tell is usually the same: a fogged double-pane you can’t wipe clear, a patio door that drags on the track, or a crank that turns freely without moving the sash.

Owners rarely notice the first failure. They notice the second symptom, months later, when the seal is fully gone or the sliding door won’t latch and they can hear it rattle in a windstorm. This page is for the Sunrise Manor owner who’s already past the first symptom and wants a real answer on parts, fitment and price.
Which CGI Models This Applies To

CGI (the trade name for a manufacturer’s series of aluminum and vinyl units, and a common label on builder-installed windows in Southern Nevada subdivisions) shows up across a few series. We identify the part from three things: the series label printed on the glass spacer or stamped in the sash channel, the exact measured glass size (rough opening dimensions aren’t the same as the visible glass area), and the balance or hinge hardware visible on the frame. Serial labels are the fastest route; measurements are the safety net when the label is faded from sun.
Here’s the compatibility gotcha most homeowners miss: on CGI slider and casement series, the sash channel depth changed at points during production. A replacement sash built for one channel depth will not seat squarely in the other, and the gap is small enough to look fine on install then leak at first rain. Measure channel depth, not just width. On hardware, OEM parts match the original mechanism exactly but carry the OEM price and timeline. Quality aftermarket equivalents for rollers, balances, screens and sweeps are widely available, often in stock locally, and work fine where the interface is standardized. For a door, the slab or the sealed glass unit, we generally recommend staying with a manufacturer-spec part so the warranty and weather seal hold. This is the OEM-vs-aftermarket call we make with owners every week in Sunrise Manor.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
Each of these has a specific cause, and none of them fix themselves.
- Fogging between the panes. The argon seal has failed, letting moisture into the sealed unit. No cleaner fixes it; the glass unit has to be replaced.
- The crank turns but the sash stays put. The operator arm has stripped or the hinge is bent. On CGI casement and awning units, this is a mechanism problem, not a glass problem.
- The slider drags or won’t latch. Worn nylon rollers or a roller out of its track. The latch gap is the real concern; a door that won’t hit the keeper isn’t secure.
- Water stains or soft paint at the sill. Failed weatherstripping or a cracked sweep let water past the frame; over a season it starts eating into the sill material. Sunrise Manor’s summer sun bakes sweeps and gaskets faster than most homeowners expect.
- A draft or rattle in wind. Compromised weatherseal, a bent frame corner, or a piece of hardware that’s worked loose.
Sunrise Manor’s heat is rough on vinyl and gasket material. UV exposure and summer highs crack sweeps and dry out seals faster than in cooler climates, which is why we see window and door hardware fail earlier here than in other parts of the country. Most hardware on a builder-grade CGI unit has a real service life in the 8 – 15 year range under Nevada sun before it starts giving you trouble.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed prices in Sunrise Manor, quoted as a written line item with parts and labor broken out:

| Scope | Typical Installed Range |
|---|---|
| Single window replacement (parts + labor) | $400 – $1,200 |
| Window replacement, whole-home | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
| Patio or entry door replacement | Priced per unit; quoted with parts and labor itemized |
What drives the range: unit size and series, whether it’s impact-rated, frame condition (a rotted sill adds labor), and glass type. We always issue a written price before work starts. Every install carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely do the diagnostic work: read the series label, measure the visible glass size and channel depth, test the crank and latch by hand, and photograph the hardware. That’s the information we need to quote accurately. What we don’t recommend is DIY replacement of the sealed glass unit or the operator mechanism on a CGI unit, and we won’t give you a how-to for the door hardware because a mis-set hinge can leave a door that looks closed but doesn’t seal. The risk is water intrusion, a failed warranty, and redoing the job twice. Call us and we’ll quote it from your photos; if it’s a job you truly can do safely, we’ll tell you.
FAQs

Expect 15 – 25 years out of a well-installed unit, with hardware like rollers and operators typically the first to go, often in the 8 – 15 year range under Sunrise Manor’s heat and UV load. If yours is past that window and showing two or more symptoms, replacement is usually the better spend than repeated repairs.
Often yes. A fogged unit is a glass-only swap; a stripped crank is a mechanism swap. The question is whether the frame is still sound. If the sill is soft or the channel is warped, a repair won’t hold and replacement is the honest call. Call (844) 834-2810 and we’ll tell you which side of the line you’re on.
A single window is usually a half-day. A door replacement is typically the full day, longer if frame repair or a new rough opening is involved. Whole-home packages run several days. We’ll give you a written timeline with the written price so you know exactly what to expect before anyone arrives.
We identify the series and spec from your unit’s label and measurements, then source from manufacturers with documented specs and warranties, the same approach we take with our premium brands like KraftMaid, Cambria and Silestone. Every part comes with a traceable spec and warranty that backs our own written guarantee.
Ready to get a real number? Call (844) 834-2810 to schedule your free estimate. Bradford Remodeling is an independent contractor, not affiliated with CGI, and the price you get in writing before work starts is the price you pay.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












