







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Sunrise Manor Owner’s Guide
We install and replace CGI-compatible driveway and paver systems in Sunrise Manor, and a typical paver driveway runs $7,000 to $18,000 installed depending on square footage, base prep, and whether old concrete has to come out first. Concrete driveways land in the $4,500 to $12,000 range, and asphalt paving sits at $3,500 to $9,000. Scheduling depends on the season and site conditions, so call for a written price before any work starts.

Owners usually catch the failure the same way. A paver lifts slightly under a front tire after a summer of 115-degree heat. Sand joints wash out after the first monsoon, and the edges start to spread. On concrete, you’ll see hairline cracks widen through one cooling cycle, or a sunken panel that flexes when you walk it. In Sunrise Manor, freeze-thaw is rarely the culprit – it’s heat, sun exposure, and the caliche-heavy soil underneath that does the damage.
Which CGI Models This Applies To

“CGI” on a paver or driveway spec sheet usually refers to the concrete paver line your home was built with, not a single universal product. Sunrise Manor homes from the 1990s through the 2010s were often built with interlocking block pavers in standard 4×8 or 6×9 profiles, and the exact size, thickness, and color batch matters if you want a repair that blends instead of standing out.
Before ordering anything, measure an existing paver’s length, width, and thickness with a tape. Thickness is the one that trips people up: 2-3/8 inch pavers are common in older residential driveways, while 2-3/4 inch is the standard for driveways that take vehicle weight. A thinner match will fail faster. Then find the manufacturer stamp or batch marking, usually on the side or underside of a loose paver.
OEM pavers are the safe match when you’re patching a small area or want the geometry to line up. Quality aftermarket equivalents from documented brands like Belgard and Unilock are often the better move for a full driveway replacement, because they carry manufacturer specs and warranties that a mismatched batch of unknown pavers won’t. We’ll tell you which way makes sense for your specific CGI setup.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
- Joint sand washing out after monsoon season. The sand that locks pavers together erodes with heavy rain and traffic. Once the joints open, pavers shift and edges chip.
- Pavers lifting or rocking underfoot. This usually means the base layer has settled or wasn’t compacted deep enough. In Sunrise Manor’s caliche soil, poor drainage underneath accelerates it.
- Widening hairline cracks in a concrete driveway. Heat expansion and soil movement open cracks that let water in. Once water freezes (rare here) or sits, the crack spreads.
- Sunken or heaving panels. A concrete panel that dips or rises out of line is a base failure, not a surface one. Patching the top won’t fix it.
- Faded or chalky surface color. UV exposure here bleaches pavers and concrete faster than in milder climates. Fading alone isn’t structural, but chalky, pitting surfaces let moisture in.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Sunrise Manor, straight from the written quote you’ll get from us:
- Paver driveway installation: $7,000 to $18,000
- Concrete driveway installation: $4,500 to $12,000
- Asphalt driveway paving: $3,500 to $9,000
- Driveway replacement: $5,000 to $14,000
- Driveway sealing: $250 to $700
- Paver patio installation: $3,500 to $11,000
What moves the number: square footage, base excavation depth, whether the old surface is removed and hauled, edge restraints, and drainage correction. Every price we give is written before work starts, with parts and labor broken out, and no numbers that change at the door. The work is covered by the 365-Day Done Right Promise: if something we installed fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Pull one loose paver and measure it. Note where cracks run relative to the expansion joints. Look at whether water pools near the driveway edge or runs toward the garage. Those details help us quote accurately and tell us how much base work is involved.
Where DIY goes wrong: base prep. A paver driveway is only as strong as the 6 to 8 inches of compacted aggregate under it, and doing that correctly by hand, on caliche, in Sunrise Manor heat, without a plate compactor and proper grading is the reason so many patched driveways fail within two summers. Concrete replacement is a whole different job. Save the back and let a crew with the right equipment handle it.
Call (844) 834-2810 to schedule a free estimate. We answer live, 24/7, and you’ll have a written price before anything gets touched.
FAQs

A properly installed paver driveway typically lasts 25 to 50 years with joint sand refreshed every few years, while concrete usually runs 20 to 30 years before major repair. The Nevada sun and caliche soil are the two big factors. Poor base prep can cut either lifespan in half.
Often yes. Isolated cracked pavers or a single sunken concrete panel can be pulled and reset if the base underneath is still sound. If more than about 20 percent of the surface is shifting, a full replacement usually costs less over time than repeated patches. Call (844) 834-2810 and we’ll tell you honestly which you’re looking at.
A typical residential driveway replacement runs 2 to 4 days for pavers, 1 to 3 days for concrete, and 1 to 2 days for asphalt. Cure time and weather add a bit. Sealing, if you want it, comes 30 to 60 days after installation.
We work from a documented roster of name-brand materials, including Belgard and Unilock hardscaping, so the specs and manufacturer warranties are traceable. We don’t carry parts on a truck – pavers are ordered to match your existing size, thickness, and color wherever a match is still available. For older CGI lines that are discontinued, we’ll show you the closest current equivalent and quote it in writing. We’re an independent contractor and not affiliated with CGI, but we know the products well. KraftMaid, Cambria, and Silestone are also among the brands we work with on interior projects.
Call (844) 834-2810 for a free estimate. Live person, written price, and the full terms of the 365-Day Done Right Promise in your hand before any tool comes out.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












