A Bradford company - serving Sunrise Manor, NV
An open living room and dining area after a whole-home remodel
Atlas · Sunrise Manor

Atlas Windows & Doors in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Windows & Doors: The Sunrise Manor Owner’s Guide

We install and service Atlas windows and doors for Sunrise Manor homeowners, with window replacement typically running $4,500 – $15,000 installed and impact window installation at $8,000 – $25,000 depending on count and glass package. We’re an independent service provider, not affiliated with Atlas, and we schedule those installs around your calendar rather than promising a same-day swap nobody can honestly deliver on a full unit.

Professional contractor installing marble countertop on kitchen cabinets during renovation in Sunrise Manor, NV

Call (844) 834-2810

Most owners don’t discover a failing part until the symptom shows up in a specific way. A sash that won’t stay up on a mild morning. A slider that grinds halfway and stops. Haze or fog between the panes that won’t wipe clean, because the seal failed and the gas is gone. A door that used to close with two fingers and now needs a shoulder. In Sunrise Manor the pattern is usually dust and heat working on weatherstripping and nylon rollers first, long before the frame itself gives you trouble.

Which Atlas Models This Applies To

A remodeled primary suite with built-in wardrobes and a window seat

Atlas has built several product lines over the years, and the part you need depends on which one is in your wall. The practical way to sort it out is to find the manufacturer label on the window or door itself. On most Atlas units it sits in the head jamb channel or on the sash edge, visible when you open the window and look up into the frame. That label carries the series designation and often the glass package code.

What we see across Sunrise Manor is that the same nominal size doesn’t mean the same part. A tilt-latch that fits one series won’t seat in another because the pivot bar spacing and the latch tongue depth differ by a few sixteenths. Roller assemblies on sliding doors are the other common mismatch: the wheel diameter and the housing footprint change between lines, and a “close enough” roller will bind in the track within a month. Measure the existing part, photograph the old one next to a ruler, and compare dimensions before you buy anything.

On the OEM-versus-aftermarket question, our answer is straightforward. For structural or load-bearing components, go OEM or an exact-spec equivalent. For wear items like weatherstripping, sweeps, and screen hardware, a quality aftermarket part matched to the correct size performs the same and costs less. We work with a documented roster of brands across our remodeling work – KraftMaid, Cambria, and Silestone among them – and we apply the same discipline to window and door hardware: known spec, known source, no guesswork.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Windows & Doors Is Failing

  • The sash drifts down or won’t hold position. That’s a balance or spiral-tilt assembly losing tension, and it’s the single most common failure we see. The mechanism carries the weight of the sash; once it weakens, the window becomes a hazard to fingers.
  • Condensation or fog between the panes. The insulated glass unit’s perimeter seal has failed and moisture has entered the cavity. No amount of wiping fixes it. The sealed unit needs replacing, not the whole window.
  • A slider that grinds or jumps the track. Usually a worn or seized roller, sometimes a bent track from settling. Desert dust accelerates roller wear because grit works into the wheel bearing.
  • Drafts and daylight around the frame. Weatherstripping has compressed or cracked, or the sill seal has dried out. In Sunrise Manor, the summer heat bakes flexible seals brittle faster than in milder climates.
  • The door won’t latch without a push or a lift. Could be a worn strike, a sagging hinge, or the frame out of square. Worth diagnosing before you assume it’s the door itself.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A wood double vanity with two mirrors after a bathroom remodel

For Sunrise Manor, window replacement runs $4,500 – $15,000 installed, and impact window installation runs $8,000 – $25,000 depending on unit count and glass rating. Those ranges cover removal, disposal, the new unit or part, sealing, and finish trim.

What drives where you land in that range: how many windows or doors, the glass package, whether the opening needs reframing or repair, and whether you’re replacing a sealed glass unit versus a whole window. A single failed IG unit costs far less than a full window swap. The range also reflects access and finish work – a second-story window or a door that needs a new threshold takes more labor.

Every price we give starts as a written price before any work begins. No numbers that move at the door. And the work is covered by the 365-Day Done Right Promise: if it fails within that full year, we come back and correct it at no charge.

DIY or Call Us?

Here’s the honest split. You can safely check most of this yourself: open the window and photograph the label, measure the part, test whether the rollers spin freely, look at the weatherstripping for cracks, and note where daylight comes through. That information is genuinely useful and we’ll take it over the phone.

Where DIY goes wrong is anything involving the balance assembly or the sealed glass unit. Window balances and tilt mechanisms are under tension, and a released spring on a large sash can slam down on hands or arms. We treat those as a trained-professional job, not a Saturday project. Sealed units need the right size and a proper seal or they fog again within a season. If you’re unsure which category your issue falls into, call us at (844) 834-2810 and describe the symptom – we’ll tell you straight whether it’s a DIY check or a repair.

FAQs

A finished backyard cottage with a small covered porch

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A powder room with botanical wallpaper and a stone sinkA remodeled kitchen with a waterfall island and wood cabinetsA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 834-2810
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Bradford Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch