







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Kitchen Remodeling: The Sunrise Manor Owner’s Guide
We install American Standard-compatible kitchen components for Sunrise Manor homeowners, with full kitchen remodels typically running $14,000 – $45,000, cabinet installation $4,000 – $13,000, and countertop installation $2,000 – $6,500 depending on scope and materials. American Standard itself doesn’t make kitchen cabinetry or countertops, so what most owners are actually replacing is a fixture or fitting carrying the American Standard name – a faucet, a sink, a supply valve – that’s failed mid-remodel or stalled a project before it started. The discovery usually goes the same way: the old faucet drips onto new cabinets, the sink doesn’t fit the cutout the counter fabricator cut, or a builder-grade valve won’t hold to the new rough-in. Call (844) 834-2810 and we’ll price it in writing before anything comes off the wall.

Which American Standard Models This Applies To

American Standard kitchen fixtures fall into a few families worth knowing by name. The Colony and Sterling lines sit at builder-grade spec – common in Sunrise Manor’s 1990s and 2000s tract homes – and use standard 1.5-inch drain openings with 8-inch widespread or 4-inch centerset faucet drilling. Above that, the Delancey and Fairbury pull-down faucets and the Portsmouth bridge faucet use a different valve cartridge and a wider escutcheon plate, which matters when you’re reusing an existing three-hole deck. Spec the wrong one and the holes don’t line up with the plate, or the plate won’t cover the old drilling.
To identify what you have, shut off the water and look at two places: the model number stamped on the faucet body near the supply connection (not the aerator), and the underside of the sink rim, where American Standard stamps the model and material code. Measure your existing cutout and the spread between faucet holes before you buy anything – those two dimensions, not the brand, decide whether a replacement drops in. On the OEM-versus-aftermarket call: for a faucet cartridge or aerator inside a fixture you’re keeping, an OEM American Standard part is the right choice because tolerances change between production runs. For the fixture as a whole, a quality aftermarket equivalent from a documented brand like Moen or Kohler is often a better long-term buy than chasing a discontinued American Standard model, and we’ll say so plainly when that’s the case. We don’t stock parts or carry them on a truck – what we do is specify the exact replacement and install it as part of the remodel.
Bradford Remodeling is an independent service provider. We’re not affiliated with American Standard, and we don’t claim to be.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Kitchen Remodeling Is Failing
- The faucet drips from the spout when shut off. That’s a worn ceramic cartridge or seat, not a loose handle. American Standard cartridge assemblies fail at the O-rings first, and a slow drip will stain a new cabinet run within months.
- The pull-down head won’t stay seated. The magnet or clip in the spray head wears out on the Delancey and Fairbury lines, and the head hangs. It’s a small part, but replacing it means matching the exact head to the spout, not just the brand.
- Water weeps at the base of the faucet onto the deck. The mounting gasket has compressed or the escutcheon seal has failed. Left alone, water tracks back to the cabinet substrate and softens it.
- The sink cutout doesn’t match the new counter. This is the failure owners find mid-project. If the fabricator cut for the wrong sink, the American Standard model you bought won’t seat and the counter is already drilled.
- Supply valves won’t fully shut off. A valve that only slows the water, not stops it, means the rough-in needs attention before a new fixture goes on. That’s a plumbing job, and it’s the one to catch early.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what our Sunrise Manor pricing looks like for the kitchen work around an American Standard fixture replacement. Lead range for a full kitchen remodel is $14,000 – $45,000. A small kitchen remodel runs $9,000 – $20,000. Cabinet installation $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash installation $800 – $2,500, and a kitchen island $3,000 – $10,000. A fixture swap on its own is priced as part of the job, not a line item you have to chase.
The range moves on three things: cabinet box and door material, counter surface (Cambria and Caesarstone sit at the top, laminate and butcher block at the bottom), and whether the rough-in needs correction. Every price we give you is written before work starts, and it doesn’t move at the door. The completed work carries the 365-Day Done Right Promise – a full-year written guarantee, and if the work fails inside that window we come back and correct it at no charge.
DIY or Call Us?
There’s a short list of things you can safely check yourself. Read the model number, measure the faucet spread and sink cutout, and look for water staining under the cabinet floor. That’s information gathering, and it helps us quote accurately.
Where DIY goes wrong is anything past the shutoff valve. Replacing a supply valve, correcting a rough-in, or resetting a faucet that won’t seal requires the water off at the main and a proper joint – done wrong, it fails behind a finished cabinet wall where you can’t see it until the damage is done. If you’re not sure the valve holds, don’t test it by opening it under pressure. Call us instead. We’ll tell you over the phone whether it’s a fixture job or a plumbing job, and we answer live, 24 hours a day, 7 days a week, at (844) 834-2810.
FAQs

Expect 8 – 12 years from a quality faucet here, shorter than the national average. Sunrise Manor’s hard water and the calcium load in Southern Nevada municipal supply wear ceramic cartridges faster than soft-water markets, and the summer heat cycling through a kitchen that faces west accelerates gasket compression. Call (844) 834-2810 for an exact quote on replacement – estimates are free.
Often yes, if the body and finish are sound and the failure is a cartridge, aerator, or spray head. If the finish is pitted through or the body has cracked at a fitting, repair isn’t worth it. We’ll tell you which case you’re in before you spend anything.
The fixture itself is typically a few hours once the rough-in is verified. The real time sits in the sequencing – the sink and faucet go in after the counter is set, which is why we map the order before work starts. Call (844) 834-2810 to schedule your free estimate and we’ll give you a written schedule.
We identify your exact model from the stamped number and the measurements, then specify an OEM part when tolerances demand it, or a documented equivalent from a brand like KraftMaid, Cambria, or Silestone where the fit allows. We don’t claim to stock parts. We specify and install, and the specification is on paper before the order goes out.
If you’ve got an American Standard fixture that’s failed you and a kitchen project hanging on it, call Bradford Remodeling Sunrise Manor at (844) 834-2810 for a free estimate. You’ll get a written price before any work starts, background-checked technicians who show up when scheduled, and the 365-Day Done Right Promise on the finish work. We work with a documented brand roster including KraftMaid, Cambria, and Silestone, so the specification is traceable from the quote to the signed guarantee in your hand.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












