







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Home Additions & ADU: The Sunrise Manor Owner’s Guide
We build American Standard-spec home additions and ADUs for Sunrise Manor homeowners, and the installed price for this scope runs $45,000 – $130,000 depending on square footage, foundation type, and how much utilities work is involved. There’s no same-day version of this job – an addition or ADU is a permitted, inspected build that runs weeks to months. Most Sunrise Manor owners end up on this page the way you probably did: an old addition or converted garage never felt right, the room drifts hot or cold, the roofline or tie-in shows water staining, or a prior owner’s work failed inspection and now you can’t finance or insure it without correcting it.

Which American Standard Models This Applies To

First, a straight correction: American Standard is a plumbing fixture and HVAC brand, not a manufacturer of additions or ADUs. There’s no American Standard model of a home addition. What you’re really asking is either (a) the addition or ADU will carry American Standard fixtures – toilets, tubs, sinks, HVAC equipment – and you want those roughed in and specified correctly, or (b) you have an existing structure built to a plan identified as an American Standard series on your drawings or permit paperwork and need it matched or corrected.
How to identify what you actually have: pull the permit record from Clark County, find the plan sheet, and check the fixture schedule. American Standard fixture model numbers follow a pattern – the series prefix (e.g., Cadet, Champion, Colony on toilets; Heritage and Studio on tubs) plus a numeric code – and that code is stamped inside the toilet tank lid or on the fixture back, not on the box. On HVAC equipment, the model plate is on the outdoor condenser cabinet and the data plate inside the air handler. Write those numbers down before anyone quotes you anything; a fixture schedule with the wrong rough-in dimensions (12-inch vs 10-inch rough on a toilet, for example) is the single most common reason a finished bathroom in Sunrise Manor fails the final inspection.
The OEM-versus-aftermarket question lands differently here than on a repair. On fixtures, American Standard’s own parts are widely available and the aftermarket “universal fit” fill valves and flappers are where callbacks come from. On the structure itself, there’s no OEM. It’s lumber, concrete, and a stamped plan. What we control is the spec sheet, and we build to a documented roster of name brands – KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, Kohler and Moen fixtures among others – so every line is traceable to a manufacturer spec and warranty, not a guess from whoever’s at the supply yard that morning.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Home Additions & ADU Is Failing
These are the symptoms we actually get called about in Sunrise Manor. Each one has a specific cause behind it, and the cause matters more than the symptom.
- The added room won’t hold temperature. Either the mini-split or duct run was sized for a different square footage, or the tie-in wall was framed without continuous insulation. In Sunrise Manor’s summer heat, an undersized system behind under-insulated framing will run constantly and still miss set point.
- Water staining at the roofline tie-in. Where the new rafters meet the existing house, flashing and kick-out details get rushed. Once monsoon-season rain works behind that seam, the damage is in the framing and drywall before you see it, not after.
- Doors that stick seasonally and cracks at the addition seam. This is differential settling between two foundations. Slab-on-grade in our soil moves, and an addition poured on a separate footing without proper doweling into the existing slab will move differently from the house it’s attached to.
- The garage conversion smells musty and the floor is cold. A converted garage needs a vapor barrier, insulation under the slab or a raised subfloor, and real ventilation. Skip those and you get condensation from the inside out, year round.
- Fixtures that never worked right from day one. Low flush volume or a toilet that rocks is usually a rough-in dimension mismatch, not a bad fixture. When the rough-in is wrong, the American Standard hardware gets blamed for a framing and plumbing error.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what this scope runs in Sunrise Manor, broken out honestly. Every number below is installed price – materials and labor, not a materials-only tease.
| Scope | Installed Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range on an addition or ADU: foundation type and soil prep, how far the utility runs extend, whether the roofline is a simple tie-in or a full rework, and the finish level you choose on fixtures, cabinetry, and flooring. A garage conversion sits lower because the shell, slab, and roof already exist – the money goes into moisture control, insulation, egress, and the interior build-out. ADUs price highest because they carry their own full utility service, full kitchen and bath rough-in, and a separate inspection schedule.
Every one of these projects gets a written price before any work starts. No numbers that move at the door. Permits get pulled and inspections passed, and when the job closes you hold a signed written guarantee: our 365-Day Done Right Promise covers a full year from completion, and if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely do a few things here. Pull your permit record, photograph the fixture model plates, measure the addition’s exterior dimensions, and note where the temperature swings and the water stains are. That file makes the estimate faster and more accurate. What you can’t safely do is touch the structural, plumbing rough-in, or electrical side. Framing a tie-in wrong or moving a supply line under a slab isn’t a weekend correction – it’s a re-inspection, a re-pour, and sometimes a tear-out. Gas and electrical connections are the same story; a permit and a licensed trade are not optional there, and we won’t hand you steps that put you at risk.
Call (844) 834-2810 and we’ll walk the site, put the number in writing, and tell you plainly what’s a repair versus what’s a rebuild. A real person answers the phone, 24 hours a day. Bradford Remodeling Sunrise Manor is an independent remodeling contractor – we’re not affiliated with American Standard – and we also work with KraftMaid, Cambria, and Silestone cabinetry and surface lines when your scope calls for them.
FAQs

A properly built addition or ADU can serve 30 to 50 years before major structural or systems work, but that lifespan depends almost entirely on two things in the Nevada climate: roof tie-in flashing and slab moisture control. Sun exposure and monsoon rain are the two forces that take these structures down early. Call (844) 834-2810 for an inspection and a written scope – estimates are free.
Often yes. Sticking doors and cracks at the seam can be corrected with footing work and crack stitching; a thermal problem can be fixed with air sealing and added insulation; fixture failures are usually a rough-in correction, not a rebuild. The one case where repair rarely pencils out is a garage conversion done without a vapor barrier – the moisture damage is usually in the assembly and the fix costs more than redoing it. Call (844) 834-2810 and we’ll tell you which one you’re in, honestly.
Plan on weeks, not days: a garage conversion typically runs several weeks of on-site work, a home addition several weeks to a few months, and an ADU the longest because it carries its own full utility and inspection schedule. Clark County permitting and inspection windows add to the calendar before work even starts. Call (844) 834-2810 for a written schedule with your estimate – the timeline is in the paperwork, not just in a conversation.
We specify American Standard fixture model numbers on your plan sheet and source them so the rough-in dimensions are confirmed before framing, with a documented manufacturer spec and warranty behind each line. Cabinetry and surfaces come from a documented roster including KraftMaid, Wellborn, Cambria, and Silestone, so nothing on your job is a mystery brand from the back of a truck. Parts are ordered to the job – we don’t claim to carry them on a truck. Call (844) 834-2810 to schedule your free estimate.
Call (844) 834-2810 to schedule your free estimate. You’ll get a written price before any work starts, background-checked and uniformed technicians on the job, and the 365-Day Done Right Promise in writing when the job closes. Our technicians have up to 22 years of experience, and The Garrison Standard is the framework behind every number and every guarantee we hand you.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












