







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Sunrise Manor Owner’s Guide
Tremron kitchen remodeling in Sunrise Manor typically runs $14,000 to $45,000 installed, with small kitchens landing between $9,000 and $20,000. Bradford Remodeling is an independent contractor, not affiliated with Tremron, and we install Tremron-compatible kitchen systems alongside KraftMaid, Cambria, and Silestone materials. Most Sunrise Manor owners call us after a slow failure, not a sudden one: a door that stopped closing flush, caulk lines that keep reopening along the backsplash, or grout that never seems to dry out no matter how many times it gets patched. A failed component here rarely announces itself. It typically shows up as a small alignment drift, a soft spot under a cabinet, or a piece of finish that lifts after a single hot week. Sunrise Manor’s summer heat and dry winter air put real stress on kitchen assemblies, and the parts that hold everything together feel it first.

Which Tremron Models This Applies To

Tremron makes paver and hardscape products primarily, and its kitchen-adjacent lines are surface and finish products, not cabinetry or hardware. That matters when you’re matching a replacement part to a model, because the part you need may actually belong to the cabinet, countertop, or fixture brand underneath the Tremron finish, not Tremron itself. Before you order anything, check the underside or back edge of the installed piece for a manufacturer stamp or series code. Tremron pavers and surface tiles typically carry a printed identifier and a nominal thickness that varies by series. Measure the actual piece with a tape, not the spec sheet: nominal and actual sizes differ, and a half-inch gap will break the layout on a kitchen floor that runs wall to wall.
Once you have the series name and the measured thickness, you’re ready to decide between an OEM replacement and a quality aftermarket equivalent. For Tremron-specific finishes, OEM match is almost always the right call, because aftermarket surface tiles rarely match the color lot, and a mismatched run of four or five tiles will be visible from across the room. For the cabinetry and countertop components that surround a Tremron surface, aftermarket equivalents from established brands (KraftMaid, Cambria, Silestone among them) are a legitimate path when the OEM part is discontinued. We’ve walked Sunrise Manor owners through both directions. We don’t stock parts and we don’t carry parts on a truck; we source what the job needs once the model is confirmed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Kitchen Remodeling Is Failing
- A backsplash caulk line that keeps reopening: the tile substrate behind it is moving, usually because the bond has weakened under the surface. Re-caulking is a bandage, not a fix.
- Grout lines that stay dark or damp after wiping: moisture is getting behind the surface. In Sunrise Manor’s dry climate this should never take more than a few minutes to dry, so persistent darkness points to a seal failure underneath.
- Cabinets that won’t close flush after years of use: the hinge or the mounting substrate has shifted. If the door sat flush for years and suddenly doesn’t, the failure is almost always in the mount, not the door.
- Surface tiles that pop or sound hollow when tapped: the bond between the tile and the substrate has failed, often after thermal cycling through a hot Sunrise Manor summer. Hollow sound is the tell. A tile that’s already lifted is one good bump from a chip.
- Chipped or cracked edges that grow after a small impact: a brittle, aged surface with compromised edges will keep spalling. Once a chip grows between visits, the piece needs replacing, not touching up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Documented installed pricing for the Sunrise Manor area:
| Scope | Installed Price Range |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the price: total square footage, whether substrate repair is needed under the surface, choice of finish, and whether adjacent cabinetry has to be reset to receive a new piece. Every quote is a written, line-item price before any work starts. Materials and labor are broken out so you can see the parts cost and the install cost separately. All work is covered by the 365-Day Done Right Promise: if the install fails inside a full year, we return and correct it at no charge. The written guarantee is in your hand at close, along with a clean site and a documented scope.

DIY or Call Us?
You can safely measure, photograph manufacturer markings, and check caulk and grout lines for movement. Those are diagnostic steps and they’ll save you time when you call. What we don’t recommend: prying out a bonded surface tile or resetting a cabinet mount yourself. A surface tile that’s bonded to a substrate can chip in layers when removed cold, and if the substrate below it is already compromised you’ll be working over a failing base. On cabinets, an improperly shimmed mount can pull out of drywall over time, and that’s a load-bearing question, not a cosmetic one. Sunrise Manor’s dry-season climate works against you too: wood and drywall shrink slightly in winter, which means a tight summer repair can loosen by January. Call (844) 834-2810 and we’ll tell you honestly whether it’s a same-visit fix or a scheduled install.
FAQs

Tremron surface materials installed correctly and kept sealed typically hold up 15 to 25 years in Nevada’s climate. The seal is the variable, not the tile. Under Sunrise Manor’s summer heat and winter dryness, sealant life is closer to 3 to 5 years between reapplications, and skipping those is what causes early failure. Call (844) 834-2810 for a free assessment of what’s left on your current install.
Sometimes, yes. A single loosened tile with intact substrate can usually be re-bonded, and a cabinet door with a hinge problem can often be fixed without replacing the door. What can’t be repaired is a substrate that’s already moved or a surface that’s chipped past the finish layer. We tell you which situation you’re in before we quote. Call (844) 834-2810 for a free estimate either way.
A single-piece surface replacement is typically a same-visit job, usually a few hours. A backsplash or countertop section that touches multiple tiles runs a day or two. A full kitchen install falls into the $14,000 – $45,000 range and schedules over weeks, not days. We’ll give you a written timeline with the written price before anything starts.
With the series name and measured thickness in hand, we source through Tremron’s supplier network for the matching finish lot. If the exact series is discontinued, we identify the closest documented equivalent and show you the difference before you commit. We don’t stock parts locally and we don’t carry parts on a truck; ordering per job is what keeps the match honest. Call (844) 834-2810 to start the model-matching conversation.
Bradford Remodeling is a member of the Garrison Partners family, independently owned and operated, and every Sunrise Manor project is held to The Garrison Standard: written price before work, background-checked uniformed technicians, live-person phone coverage around the clock, and the 365-Day Done Right Promise on every completed job. Our technicians have up to 22 years of experience. If you’re ready to get a real number for your Sunrise Manor kitchen, call (844) 834-2810 for a free estimate. A live person picks up.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












