







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Sunrise Manor Owner’s Guide
Kitchen remodeling for a Unilock home in Sunrise Manor typically runs $14,000 – $45,000 installed, with smaller projects landing between $9,000 and $20,000. Unilock is a familiar name here because of its hardscape and paver lines, and homeowners who love that material outside often ask us to carry the same disciplined, specification-first approach into the kitchen. Most owners don’t discover a failing part inside a kitchen remodel until something gives: a cabinet door that won’t stay shut, a countertop seam that opens up, a drawer that grinds and then won’t slide. That’s the moment they start hunting for a straight answer, an honest price, and a crew that shows up when the schedule says it will.

Key Takeaways
- Unilock-compatible kitchen remodeling in Sunrise Manor runs $14,000 – $45,000, and every price is written before work starts.
- Cabinet installation is $4,000 – $13,000; countertops $2,000 – $6,500; backsplash $800 – $2,500; islands $3,000 – $10,000.
- Every finished project carries the 365-Day Done Right Promise, in writing.
- Bradford Remodeling is an independent contractor and is not affiliated with Unilock.
Which Unilock Models This Applies To

When Sunrise Manor homeowners talk about a Unilock kitchen, they’re almost always describing a home whose finishes were specified around Unilock-manufactured material, most often the paver and hardscape lines that owners want echoed on a backsplash, an island face, or a patio-to-kitchen transition. Unilock is not a cabinetry or appliance manufacturer, so there’s no serial tag to match for a cabinet. That distinction matters: if a cabinet door is failing, the part you’re actually replacing is a KraftMaid, Wellborn, or other cabinetry item; if a stone face or a hardscape transition is the issue, that’s the Unilock side of the job.
Identify what you have before you price anything. Check the inside of any cabinet door for the manufacturer label, measure the opening and the door width, and photograph the countertop edge so a fabricator can match the profile. The OEM-versus-aftermarket question usually decides itself: an OEM part for a discontinued model may not exist within a reasonable wait, and a quality aftermarket equivalent (a drawer glide, a hinge, a seam fill) often outlasts what was there. On surfaces we match the original specification, whether that’s Cambria, Silestone, or a Unilock hardscape profile. We also install KraftMaid, Cambria, and Silestone throughout Sunrise Manor kitchens where the original spec doesn’t hold up to daily use. We’re an independent contractor, not affiliated with Unilock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
The failures here are less about the Unilock material and more about what’s around it. Nevada’s dry air and wide temperature swings pull at every joint, and a Sunrise Manor kitchen that looked perfect in spring can show its first seam crack by late summer.
- Cabinet doors that drag, sag, or won’t close flush. A failed hinge or a stripped screw in a soft substrate lets a door drop over time, and a dropped door is a two-screw fix only if the wood behind it is still sound.
- Countertop seams opening or catching a fingernail. Seams move when the substrate under the surface flexes or when the adhesive was under-applied. A high desert seasonal swing speeds that up, and a seam that catches is a repairable seam before it’s a cracked surface.
- Drawers that grind, stick, or pull loose. Glides wear from grit and load, and a drawer that pulls away from the box usually means the mounting screws have lost their bite in the cabinet side.
- Backsplash tile lifting or grout opening at the top edge. That’s almost always movement where the wall meets the counter, not a bad tile. The fix is the joint, not the whole splash.
- A kitchen that no longer fits how you cook. Not a failure you can see, but the reason most Sunrise Manor owners call. If the layout fights you every night, no hinge swap solves it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full Unilock-compatible kitchen remodel in Sunrise Manor runs $14,000 – $45,000 installed. What drives the number is scope: how many cabinets you replace, whether the plumbing and electrical rough-in moves, and how much of the finished material is Unilock-matching stone versus standard cabinetry.
| Line item | Installed range |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Every price is written before a tool comes out, so the parts and the labor are on the same line item and nothing moves at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. You close the job with a clean site, a documented scope, and a signed written guarantee in your hand.
DIY or Call Us?
An owner can safely check some of this. Open every door and look for the manufacturer label, measure the cabinet openings, photograph the failing hinge or glide, and note whether the countertop seam is opening or the surface itself is cracked. Those checks help us price accurately.
Where DIY goes wrong: swapping a cabinet door that no longer matches the run, filling a moving countertop seam that opens again in a season, or pulling a drawer box to chase a glide and cracking a substrate that wasn’t sound to begin with. And if the work touches plumbing or electrical inside the wall, that belongs to a licensed trade, full stop. Call (844) 834-2810 and we’ll give you the written range for your Sunrise Manor kitchen before anyone commits to a schedule.
FAQs

A full kitchen remodel typically takes several weeks from demo to final walkthrough, and a smaller scope like cabinet or countertop replacement runs shorter. Exact timing depends on material lead times and inspection scheduling in Sunrise Manor. Call (844) 834-2810 for a schedule and price estimate on your specific scope.
Often, yes. A single failed hinge, glide, or countertop seam can be corrected without replacing the whole kitchen, and that’s the first thing we price. Structural or layout failures are where replacement makes more sense. Call (844) 834-2810 and we’ll tell you which side of that line your job falls on, with the written price either way.
No. Our price is written before work begins and doesn’t move at the door. If the scope genuinely changes, that gets documented before we proceed, never after the fact. Call (844) 834-2810 to lock in your written price for Sunrise Manor.
We work from a documented roster of name-brand cabinetry and surfaces – KraftMaid, Cambria, Silestone, and others – so every part is traceable to a manufacturer spec and warranty. Where an OEM part is discontinued, we price a quality equivalent with a written note on what it is and why. Call (844) 834-2810 and we’ll walk you through the sourcing for your exact model.
Whether you’re replacing a single failing part or planning a full Unilock-compatible kitchen in Sunrise Manor, the next step is the same: a free estimate and a written price before any work starts. A live person answers the phone around the clock, so call (844) 834-2810 whenever it’s convenient for you, and we’ll get your Sunrise Manor project squared away on paper first.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












