







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Bathroom Remodeling: The Sunrise Manor Owner’s Guide
Ameristar-compatible bathroom remodeling in Sunrise Manor typically runs $9,000 – $28,000 installed, with small bathroom remodels landing at $5,000 – $12,000. We match Ameristar fixtures, trim, and substrates to the model numbers already in your bathroom and put a written price in front of you before any work starts. Scheduling follows a planned calendar, not same-day dispatch.

Owners don’t usually arrive here by browsing. They arrive because a shower surround has gone soft behind the caulk line, a vanity top has crazed after a decade of Las Vegas Valley hard water, or a tub-to-shower conversion was pieced together by someone who never matched the Ameristar drain rough-in. The symptom is small. The cause underneath it usually isn’t.
Which Ameristar Models This Applies To

Ameristar covers a wide spread of the bathroom market: shower surrounds and pans, tub liners, vanity tops and bases, and the plumbing trim that ties them together. The compatibility gotcha is that Ameristar part numbers are series-specific. A drain assembly or surround panel listed for a 60-inch alcove series will not drop into a 54-inch model without a different rough-in, and the two look nearly identical on a shelf.
Find your model plate before anything else. Look on the tub apron, behind the toilet tank, or on the underside of the vanity cabinet. Photograph it. If the plate is gone, measure the finished alcove opening, the drain centerline to each wall, and the shower valve height. Those four numbers identify most Ameristar assemblies. For an Ameristar part specifically, we compare OEM and quality aftermarket equivalents on three points: exact dimensional match, finish match to the discontinued original, and whether the manufacturer’s warranty survives the substitution. Where OEM is available and the price is close, OEM is the right answer. Where a series is discontinued and the OEM part is gone, an aftermarket equivalent that matches spec is the honest path, and we’ll say so in writing.
We work with the same documented brand roster on every job, including KraftMaid, Cambria, and Silestone where the scope calls for a full remodel rather than a part swap.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Bathroom Remodeling Is Failing
- Caulk that won’t stay sealed at the pan or surround joint. Movement or a failed flange behind the wall is letting water past. Las Vegas Valley’s low humidity dries the surface fast and hides the leak until the substrate swells.
- Soft or spongy floor at the shower threshold. Water has reached the subfloor. In Sunrise Manor, we see this on original builder-grade installs where the pan was set on greenboard instead of a proper moisture barrier.
- A tub liner that flexes underfoot. The liner was set without a mortar base, so it’s carrying the load on the rim instead of the floor. It will crack, and it usually cracks at the drain.
- Chalky, chalky-feeling vanity top surface with fine spider cracks. Hard water and years of cleaning product have eaten the gel coat. Mineral scale in Sunrise Manor water accelerates this.
- Water staining at the ceiling below the bathroom. This is the one to stop and call on. The failure is behind the tile, and every day of delay adds substrate to the repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
| Scope | Installed Range |
|---|---|
| Bathroom remodel (full) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
Three things move the range: whether the substrate behind the surround is sound or has to come out, whether the drain and valve location has to move, and the finish level you pick. The written price we hand you is the price. No number that changes at the door, no change orders that were knowable up front. Every completed project carries the 365-Day Done Right Promise: if the work fails inside a full year, we return and correct it at no charge. Our technicians have up to 22 years of experience, and they’re background-checked and uniformed.
DIY or Call Us?
What you can safely do: photograph the model plate, measure the alcove and drain centerline, re-caulk a dry joint, and shut off the water supply if you see active leaking. Those cost nothing and help whoever does the work.
What goes wrong on DIY Ameristar work: the pan-to-flange connection. A shower pan set without the correct mortar bed cracks at the drain within a couple of seasons, and by then the subfloor is wet. Moving a drain line, changing a shower valve, or opening a wall to find rot are plumbing and structural calls. Damaged framing behind a bathroom wall is the same class of work as anything that touches gas or load-bearing walls: get a trained professional. We’ll tell you honestly which category your job is in. Call (844) 834-2810 and we’ll talk it through.
FAQs

Expect 12 to 15 years from a surround or liner, and 10 to 12 from a vanity top in this climate. The variable is water and sun, not the part. Sunrise Manor’s hard water leaves scale that holds moisture against surfaces, and the low humidity hides leaks until they’ve spread. A leaking pan installed on the wrong substrate can fail in three.
Sometimes. A cracked shower pan or a liner that’s lifted at one edge is usually a repair, and we’ll quote it that way. A liner that flexes across the whole floor, or a surround with soft substrate behind it, isn’t repairable; the wall has to come open. We’ll give you both numbers and let you decide.
A straight shower replacement or tub-to-shower conversion typically takes two to four days on site, depending on whether the substrate is sound. Full remodels run longer, and we schedule that timeline in writing before we start. We don’t promise same-day work on a planned install.
We identify the model and series from your plate or measurements, then source through manufacturer and trade channels. We do not stock parts and nothing rides on a service truck. If a series is discontinued, we’ll show you the spec-matched alternative and confirm the warranty terms before ordering. Call (844) 834-2810 for a free estimate.
Call (844) 834-2810 for a free estimate. Every price is written before any work starts, a live person answers around the clock, and the 365-Day Done Right Promise follows the work for a full year. We’re an independent service provider, not affiliated with Ameristar, and we’re glad to look at what you have.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












