







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The Sunrise Manor Owner’s Guide
We install ES Windows-compatible windows and doors for Sunrise Manor homeowners, and a typical full window replacement runs $4,500-$15,000 installed, while impact-rated units run $8,000-$25,000. A single failed component, like a balance, a swept hinge, or a glazing bead gasket, is usually a repair rather than a full replacement. We’re an independent service provider and not affiliated with ES Windows, so we match parts to your actual unit rather than assuming every ES Windows product in Sunrise Manor uses the same hardware.

Most owners find out something is wrong the same way: a window that won’t stay up in the afternoon heat, a door that drags on the threshold by July, or a gasket that crumbles into the track when they vacuum. Sunrise Manor sits in the Mojave, where summer highs push past 110°F and winter nights dip near freezing. That swing is hard on vinyl, gaskets, and weatherstripping, and it’s usually the reason a part gives out before the rest of the unit does.
Which ES Windows Models This Applies To

ES Windows is a Nevada-based manufacturer, and its product lines have changed over the years, so the part that fits one Sunrise Manor home often won’t fit the one next door. The first step is identifying what you actually have. Check the glass for an etched label or a manufacturer sticker tucked in the frame reveal, and look at the top or side of the sash for a model mark. Older ES Windows lines and newer energy-code-driven units can use different balance systems, different sash weights, and different locking hardware even when the frame dimensions look identical.
Measure carefully before ordering anything. Record the visible glass width and height, the frame width and height, and the depth of the pocket the sash sits in. On ES Windows sliding units especially, the roller assembly and the track profile changed between production runs, and a roller that’s a millimeter off will bind. That’s the compatibility gotcha we see most often in Sunrise Manor.
Then make the OEM-versus-aftermarket call. OEM parts give you an exact fit and match the original warranty spec. Quality aftermarket equivalents – glazing gaskets, weatherstripping, rollers – can cost meaningfully less and perform fine, as long as the spec matches. For structural hardware and anything load-bearing, we lean OEM. For seals and trim, aftermarket is often the sensible choice. We don’t stock parts and we don’t carry them on a truck; we source the correct part for your unit, which is why the identification step matters so much.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Windows & Doors Is Failing
- The window won’t stay open. A failed balance or a snapped balance cord is the usual cause. In Sunrise Manor heat, vinyl and the balance housing expand and contract, and worn balances lose their tension faster than in milder climates.
- The sash drags or sticks in the track. This is usually worn rollers or a gasket that’s swollen and flattened after years of desert sun. Left long enough, the sash can jump the track and crack the frame.
- You feel hot air at the edges in summer. Crumbling weatherstripping or a compressed gasket lets conditioned air escape and heat seep in. That shows up as a higher power bill before you ever see daylight through the seam.
- The door drags on the threshold or won’t latch. Hinge wear or a settled frame is the common cause. Threshold drag grinds the door bottom and eventually warps the slab.
- Fogging or condensation between the panes. A failed seal on a dual-pane unit lets moisture in, and once the desiccant is spent, the glass is the part that has to be replaced. No gasket fix solves this one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Sunrise Manor, window replacement runs $4,500-$15,000 installed for a typical home, and impact window installation runs $8,000-$25,000 where impact-rated glass is the goal. A single failed part – a balance, a set of rollers, a door sweep, weatherstripping – is a much smaller line item than a full replacement, and the exact price depends on the part, the unit, and how many you need done. We give you a written price before any work starts, and that price doesn’t move at the door.
What drives the range: unit size and count, glazing type, whether the frame is sound or needs work, and whether you’re matching an older ES Windows profile. Our written quote is line-item, so you see parts and labor separately. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge. We also service KraftMaid, Cambria, and Silestone products for Sunrise Manor homeowners working through a wider remodel.
DIY or Call Us?
You can safely do the identification work yourself. Read the label on the glass, measure the glass and frame dimensions, photograph the failed part next to a tape measure, and check whether the sash is square in the frame. That information is what makes a correct part match possible, and most owners can gather it in ten minutes.
Where it goes wrong: forcing a swollen sash back into a track, prying a balance housing, or replacing dual-pane glass yourself. A window sash is heavy and can drop without warning, and a failed seal on the glass means the whole insulated unit has to come out, not something you can patch. There’s no high-tension spring here to respect, but a dropped sash and cut glass are real hazards. If the unit is fogged, dragging hard, or a balance has snapped, that’s the point to call. Call (844) 834-2810 and we’ll talk through what you’re seeing before you spend a dollar.
FAQs

Expect 15 to 25 years for the frame and glass on a well-maintained unit, with weatherstripping, gaskets, and rollers wearing out well before that – often in 7 to 12 years in Sunrise Manor’s climate, where UV and 110°F summers are hard on seals. Call (844) 834-2810 for a free estimate on your specific unit.
Often yes. Balances can be re-tensioned or swapped, rollers and weatherstripping replace on most ES Windows sliding units, and a door sweep or hinge is a straightforward fix. Fogged dual-pane glass and a cracked frame are replacement, not repair. Call (844) 834-2810 and tell us what you’re seeing – the estimate is free.
A single part swap – a balance, a set of rollers, weatherstripping – is usually a same-visit job once the correct part is in hand. A full window or door replacement depends on unit count and frame condition, and we’ll put the timeline in the written quote before any work starts. Call (844) 834-2810 to schedule your free estimate.
We identify your exact model from the glass label, measurements, and part photos, then source the OEM part or a spec-matched quality equivalent. We’re an independent provider not affiliated with ES Windows, and we don’t stock parts locally – the correct part is ordered for your unit. Call (844) 834-2810 for a free estimate.
If your ES Windows unit is failing and you’re not sure whether it’s the part or the whole window, we’ll give you a straight answer and a written price before anything happens. We answer the phone with a live person 24/7, and every job closes squared away: clean site, documented scope, signed guarantee in your hand. Call Bradford Remodeling Sunrise Manor at (844) 834-2810 for a free estimate.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












