







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Home Additions & ADU: The Sunrise Manor Owner’s Guide
We install CGI-compatible home additions and ADUs across Sunrise Manor, and most projects land between $45,000 and $130,000 installed. Standalone ADU construction runs $90,000 to $220,000, and a garage conversion sits at $30,000 to $80,000. Sunrise Manor owners usually discover trouble when the finished space starts telling on itself: a door that won’t latch, a ceiling crack that reappears after patching, a room that bakes in July no matter what the thermostat says.

Bradford Remodeling Sunrise Manor is an independent remodeling contractor. We are not affiliated with CGI. We work with CGI components and specifications as a third-party installer, and we put every scope and every price in writing before work starts.
Which CGI Models This Applies To

CGI’s residential lines cover both factory-built additions and accessory dwelling units, and the model number on your data plate or specification sheet is what tells us which structural, mechanical, and envelope components match your unit. The plate is normally inside the cabinet under the kitchen sink, in the utility closet, or on the frame near the entry door. Photograph it and text it to us before you price anything. Version matters here: CGI has revised window and door rough-opening dimensions across series generations, and an opening that measures right to the eighth of an inch can still be the wrong generation. That’s the compatibility gotcha that burns most owners shopping a part blind.
On the OEM-versus-aftermarket decision, we’re direct about it. For structural members, load-rated connectors, and anything on the envelope, use CGI-spec parts or an equivalent the spec sheet names. Interior finishes are different: cabinetry, surfaces, and fixtures can come from KraftMaid, Cambria, or Silestone and perform every bit as well, often better, at a lower price. Those substitutions get documented in the written scope so nobody argues about it later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Home Additions & ADU Is Failing
Sunrise Manor sits in the Mojave, where summer highs push past 110°F and the ground moves with shrink-swell clay. Additions and ADUs here take a beating that shows up in predictable places. Watch for:
- Hairline cracks at wall-to-ceiling joints that return after patching. This usually means differential movement between the CGI module and the site-built tie-in, not a paint problem. Patching is cosmetic; the joint detail is the fix.
- Doors and windows that stick only in summer. Thermal expansion in a low-desert climate can close a 1/8-inch gap in a rough opening. Left alone, the frame racks and the glazing seal starts to fail.
- Musty smell or soft drywall near a wet wall. A slow supply-line or drain leak inside the wall cavity. By the time you smell it, the substrate behind the tile is usually compromised.
- Ceiling stains on the addition side after monsoon season. Roof-to-wall flashing detail at the CGI tie-in is letting in water. This is the single most common envelope failure we see on additions in Sunrise Manor.
- Bouncy or hollow-sounding floor at the transition. The subfloor seam between module and site-built framing has loosened. It’s a structural connection issue, and it moves from annoying to expensive fast.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are real installed ranges for Sunrise Manor, not a “call for a quote” wall. Every number below is the full installed price, not a parts-only figure. The price we quote in writing is the price you pay.

| Project | Installed Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: square footage, whether a foundation and slab are already in place, roof complexity, and the quality tier of the finishes you choose. A 400-square-foot addition with stock finishes sits at the bottom; a full ADU with a kitchen and full bath sits at the top. Parts and labor are line-itemed separately in every quote, so you can see the cost of a CGI-spec envelope component versus a structural connector versus a finish material. Each project carries a written price before work begins and the 365-Day Done Right Promise: if the work fails inside a year, we return and correct it at no charge.
DIY or Call Us?
You can safely photograph the data plate, measure your rough openings, and note where the symptoms are. That’s useful information, and we want you to have it. What you shouldn’t do yourself is chase a structural tie-in, cut into a wet wall, or try to re-flash a roof-to-wall joint on an addition with a CGI module. Those jobs involve load paths and water management, and a bad DIY repair on a Sunrise Manor addition in the monsoon season turns a $400 flashing fix into a $6,000 substrate and drywall job. The licensed crew does the structural and envelope work, the diagnosis is free, and the guarantee is in writing. Call (844) 834-2810 to schedule a free estimate.
FAQs

With proper flashing and drainage, the envelope on a well-built addition or ADU holds 30 to 50 years in the Mojave. The weak points here are sun exposure and monsoon moisture rather than freeze-thaw. The flashing detail at the CGI tie-in is what we inspect first, and it’s the one thing that adds or subtracts a decade from that range. Call (844) 834-2810 for an inspection and an exact quote.
Often yes. A returning wall crack, a stuck door, or a leaking tie-in can usually be corrected without tearing anything down. Structural tie-in failures and rotted substrate often require replacement of that specific section. We tell you which one you’re looking at after a free on-site assessment, and we never quote a tear-out when a targeted repair will do.
A garage conversion typically runs 3 to 6 weeks; a full addition takes 8 to 16 weeks; a detached ADU runs 4 to 6 months. The range depends on permit timelines and material lead times. We give you a written schedule at the start and update it in writing when anything changes, including any delay we cause. Call (844) 834-2810 for a written timeline on your project.
We source CGI-spec components through the manufacturer’s parts channel and from verified supply houses that carry CGI-spec stock, always matched to the model number on your data plate. Where an OEM part is unavailable or overpriced, we name an equivalent and put that substitution in writing before ordering. Our technicians have up to 22 years of experience matching parts to specifications, and nothing gets ordered until the model number is confirmed. Call (844) 834-2810 for a free estimate.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












