







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Sunrise Manor Owner’s Guide
Replacing or remodeling a CGI kitchen in Sunrise Manor typically runs $14,000 – $45,000 installed, with cabinet-only work landing at $4,000 – $13,000 and countertops at $2,000 – $6,500. We install CGI-compatible cabinetry, surfaces, and fixtures, and we put the price in writing before any work starts. Most minor jobs we can start within the same week, and a full tear-out usually schedules within 2 to 3 weeks.

Owners in Sunrise Manor usually spot the failure the same way: a cabinet door that won’t stay closed, a drawer that sticks halfway, or a countertop edge lifting off the substrate. Then it spreads. One soft spot in a cabinet base leads to the whole run looking tired. A warped door in our dry desert heat tells you the frame behind it has moved. By the time you’re pricing a fix, you’re really deciding whether to patch it or replace the run.
We’re Bradford Remodeling Sunrise Manor. We don’t sell parts or carry inventory. What we do is measure, source, and install the right component for your CGI kitchen and stand behind the work under the 365-Day Done Right Promise. We’re an independent service provider, not affiliated with CGI.
Key Takeaways:
- Full CGI kitchen remodel in Sunrise Manor: $14,000 – $45,000 installed.
- Cabinet installation alone: $4,000 – $13,000. Countertops: $2,000 – $6,500.
- We measure on site, quote in writing, and lock the price before work begins.
- A live person answers the phone at (844) 834-2810 any hour, any day.
Which CGI Models This Applies To

CGI cabinets show up in a lot of the mid-2000s and 2010s builds around Sunrise Manor, and the model isn’t always obvious. Look inside the cabinet door for a sticker or ink stamp on the back of the frame or the bottom of the box. It usually lists a series line and a box depth. The common box depths are 12″, 12½”, and 24″, and getting that measurement wrong is the number-one reason a replacement door or drawer front shows up 1/8″ off and won’t sit flush.
Here’s the compatibility gotcha that catches most homeowners: CGI face-frame and frameless lines use different hinge boring patterns. A frameless replacement door with a 35mm cup bored at the wrong setback won’t bolt to your existing hinges, and it won’t close square. Measure the hinge cup center to the door edge before you order anything.
On the OEM-versus-aftermarket call for CGI specifically, the answer depends on what you’re replacing. For a single door or drawer front, a quality aftermarket match is fine as long as the finish and profile match within tolerance; the color drift on a 15-year-old cabinet run is the real problem, not the construction. For a full run, we spec KraftMaid or Wellborn boxes because the manufacturer specs and warranties back the work we do. We quote both routes in writing so you can see the real difference.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
- Doors that won’t stay flush or square. The hinge has stripped, or the frame has swollen from a slow leak under the sink. In Sunrise Manor, the swing from bone-dry air to a summer monsoon spike is what usually does it.
- Drawers that stick or grind. Undermount slides lose their alignment when the cabinet box racks, which happens faster on a tile floor over a wood subfloor in our heat.
- Countertop edge lifting or a bubble in the laminate. The substrate under the surface has gotten wet, and laminate over particleboard in a dry climate dries out and delaminates.
- Cracks at the caulk line where the backsplash meets the wall. That gap is the cabinet run settling, and it tells you the box is moving, not just the surface.
- Sagging shelves or a soft spot in the cabinet floor. The base has taken water, and particleboard in a dry climate doesn’t recover once it swells. Patching it just hides the problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what the work runs in Sunrise Manor, parts and labor together, quoted as one written price before anything comes off the wall:

| Scope | Installed Range (Sunrise Manor) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves you up or down inside those ranges: box count, whether the layout changes (moves plumbing and electrical), the surface material you pick, and how much of the old run has to come out. We use KraftMaid and Wellborn for cabinetry and Cambria, Caesarstone, and Silestone for surfaces. A written line-item price covers parts, labor, and tear-out, and there are no numbers that move at the door. Every finished project carries the 365-Day Done Right Promise: if the work fails inside that first year, we come back and correct it at no charge.
DIY or Call Us?
You can safely do a few things yourself. Grab a tape measure and get your box depth and hinge-boring setback. Check inside the cabinet for the model sticker. Photograph the failing piece next to a ruler. That’s the info that makes a quote accurate.
Where DIY goes wrong on a kitchen remodel is everything past the measuring. Pulling a base cabinet means cutting the plumbing rough-in loose. Setting a countertop means matching the substrate to the surface so it doesn’t crack under load. Replacing a run means the electrical outlets behind it have to be re-set at the right height. These are the jobs where a homeowner’s afternoon turns into a week and a surprise bill. Get the written price first. Call (844) 834-2810 and we’ll come measure and quote it, no charge and no pressure.
FAQs

Expect 15 to 20 years out of a CGI cabinet run and 10 to 15 out of a laminate or entry-level stone countertop in our climate. The dry air and the summer heat swings are what shorten those numbers – doors warp and laminate delaminates sooner than a cooler, wetter climate would cause. Call (844) 834-2810 for a straight assessment of what you’ve got.
Sometimes yes, and we’ll tell you honestly when a repair makes sense. A single door, a drawer front, or a re-caulked backsplash is a repair. A swollen cabinet base or a lifting countertop edge is usually a replacement, because the substrate under it has already gone. Call (844) 834-2810 and we’ll look at which side you’re on before quoting either.
A single cabinet door or drawer front is a same-visit job, about an hour. A full cabinet run or countertop swap is a scheduled 1 to 3 day install once the material is in hand, plus lead time on the parts themselves. We put the install date and the timeline in your written quote so there’s no guesswork. Call (844) 834-2810 to get it scheduled.
We measure your existing run on site, match the box depth and hinge-boring pattern, and pull the spec from the manufacturer’s line. We don’t keep parts in stock and we don’t carry them on a truck – every piece is ordered to your measured spec. That’s how we avoid a door that shows up 1/8″ off. Call (844) 834-2810 to get a free estimate.
Whether you’re replacing one stubborn door or gutting the whole run, the next step is the same: get a real number in writing before you commit. Bradford Remodeling Sunrise Manor runs on The Garrison Standard – documented brands, background-checked and uniformed technicians, and a written price before any tool comes out. If the work fails inside a year, the 365-Day Done Right Promise covers it. A live person picks up at (844) 834-2810 any hour of the day or night. Call us to schedule your free estimate.
Also service: KraftMaid, Cambria, and Silestone kitchen work across Sunrise Manor.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












