







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Home Additions & ADU: The Sunrise Manor Owner’s Guide
We build PGT-compatible home additions and ADUs for Sunrise Manor homeowners, and a typical project runs $45,000 – $130,000 installed, with written pricing before any work begins. More often than not, the problem surfaces after a hard summer: a sun-baked flat roof section that starts sagging, a slider that binds after the monsoon rains, or a walkthrough of the frame that reveals drywall cracking along the header of a doorway you were told was structural. That first realization is usually the reason we get the call.

Which PGT Models This Applies To

PGT ships addition and ADU structural components across its WinGuard, Eze-Breeze, and PGT Custom line families. Each has its own profile, header depth, and anchoring spec, so the part that failed on your Sunrise Manor property only fits if you match all three. The fastest way to identify yours: look for the PGT label on the glazing edge of the unit and read the model number, then measure the opening (width, height, depth) with a tape and write those numbers down. That label and those three dimensions are what we need to answer the phone and give you a real price range.
OEM versus aftermarket is the second decision. PGT’s OEM parts carry the manufacturer’s spec and warranty, and for structural headers or connecting panels we recommend staying OEM. Aftermarket equivalents are fine for cosmetic trim or soffit pieces, and they’ll save you money, but the installer has to be honest about which components they can substitute. We’re not affiliated with PGT; we’re an independent contractor that installs PGT-compatible work. KraftMaid, Cambria, and Silestone are among the other brands we routinely work with on full additions.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Home Additions & ADU Is Failing
- Hairline cracks along the ceiling line of the addition. This usually points to settling or a header spec that doesn’t match the load. In Sunrise Manor’s clay-heavy soil, a foundation that wasn’t overbuilt for the movement will show it within the first hot season.
- Sticking sliding doors or windows. When a slider binds after a summer of 115°F days, the frame or header is moving, not the glass. That’s a structural warning, not a lubrication problem.
- Water staining on the ceiling near the connection point between the existing house and the addition. Flashing failure at the tie-in is the cause more often than the roof itself. In Sunrise Manor, the intensity of monsoon rain onto a poorly flashed joint finds the gap within two seasons.
- Sagging in the floor or threshold of the addition. That’s a joist or footing issue showing through the finished floor. If you can feel a dip at the doorway, the structure underneath has already moved.
- Drafting or heat gain that wasn’t there before. A gap at the frame or seal is opening up, and it’s letting in Sunrise Manor summer air faster than your HVAC can keep up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a home addition in Sunrise Manor, the installed price range is $45,000 – $130,000, and an ADU runs $90,000 – $220,000. The range is set by square footage, whether the addition carries plumbing and a rough-in, the header and foundation spec, and whether the connection to the existing structure needs rebuild or repair. Garage conversions land between $30,000 – $80,000, and that’s often the low end of what an owner should expect for a functional ADU shell. Every one of those figures comes with the written price we provide before any work starts, line-itemed by scope.
What’s included in that number: demolition, framing, rough-in, finishes, permits, and the final inspection. We do not price parts separately on a job of this size because the structural components feed each other. Every finished addition is covered by the 365-Day Done Right Promise; if the work fails inside that year, we return and correct it at no charge. That guarantee is written and signed, in your hand, at job close.
DIY or Call Us?
You can safely check a few things yourself: read the PGT label on the glazing edge, document the model number with a photo, measure the opening, and note where the failure is. That’s the information we need to quote accurately. What you shouldn’t do is pull the header trim, open a wall to inspect framing, or try to correct a structural sag with a shim or a patch. A failed header under load can drop the wall above it, and that risk is real, not theoretical. Reconnecting a failed addition to the existing structure is genuinely dangerous work. If you’re seeing cracks, sagging, or water intrusion, put the tape down and call us. A live person at (844) 834-2810 answers 24/7, and estimates are free.
FAQs

A properly built and flashed addition in the Nevada desert generally holds 25 – 40 years before structural wear, but in Sunrise Manor that range only applies if the roof flashing, the foundation spec, and the header sizing were all done right the first time. The desert heat and the soil movement are what cut that lifespan when work is rushed. A failed addition at year 12 is a construction problem, not a normal aging problem. Call (844) 834-2810 to schedule a free inspection and get a written price on the repair.
Often, yes. A header that needs re-spec, a flashing that needs rebuilding, or a foundation that needs stabilizing can be repaired without tearing down the addition, and that’s cheaper than a full rebuild. The decision comes down to whether the framing and footing are still sound. We inspect before we price, and we tell you which route is honest. Call (844) 834-2810 to schedule the inspection and free estimate.
A repair like re-flashing or re-securing a header typically runs two to four weeks on a scheduled start, and a full addition or ADU build runs three to six months depending on scope and permit timing. Sunrise Manor inspections and Clark County permits set the clock; we pull them and manage them, not you. We’ll give you the written start date before work begins. Call (844) 834-2810 to schedule your free estimate and get a real timeline.
We source from documented manufacturer supply channels, not salvage, and we specify OEM for structural components and manufacturer-spec alternatives for cosmetic pieces. That means you get the part spec written into the job. We don’t stock parts or carry them on a truck; each component is ordered against your model and opening size. Call (844) 834-2810 and we’ll confirm the exact part for your PGT model before quoting.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












