







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Sunrise Manor Owner’s Guide
Bathroom remodeling in Sunrise Manor generally runs $9,000 – $28,000 installed, depending on how far the rough-in changes and which surfaces you replace. Small bathroom remodels land lower, at $5,000 – $12,000, and a walk-in shower on its own runs $4,500 – $12,000. We give you that number in writing before any work starts, and the written price doesn’t move at the door.

PGT is best known for its impact windows and doors, so a “PGT bathroom remodel” usually starts one of two ways. Either you’ve bought a Sunrise Manor home that already carries PGT impact glazing and you want the bathroom rebuild to keep that same spec and envelope integrity – or a shower enclosure, glass panel or mirror framed with PGT-spec hardware has failed and you need the part matched to the model. Either way, this guide tells you how to identify what you have, what fails first, and what replacement actually costs in Sunrise Manor.
Key Takeaways
- Bathroom remodels here run $9,000 – $28,000; small bathrooms $5,000 – $12,000.
- PGT model numbers are stamped on the glass etch or frame label – get that number before you order anything.
- Glass hardware and sealed glazing are the parts that fail first in Southern Nevada’s heat and dry air.
- Every Bradford project carries the 365-Day Done Right Promise in writing, and we come back at no charge if the work fails inside that window.
- Call (844) 834-2810 for a free estimate; a live person answers, day or night.
Which PGT Models This Applies To

PGT builds its impact products across several lines – WinGuard, Estate, and commercial-grade series among them – and the hardware that surrounds an existing PGT unit is specified per window or door, not per house. That’s the compatibility gotcha most Sunrise Manor homeowners miss: two bathrooms in the same home can carry different frame profiles and glass thickness, and a part matched to the wrong series won’t seat or seal. Don’t trust a photo of your neighbor’s unit.
Find the identification label. On PGT impact glass there’s usually an etch mark in one corner of the glass itself, plus a manufacturer label on the frame or sash that carries the model and series designation. Write those digits down before you spend a dollar. Measure the opening in three places – top, middle, bottom for width, left, right, center for height – and note the glass thickness if you can reach an edge.
On the OEM-versus-aftermarket question: an original PGT part gets you an exact fit and a manufacturer spec that matches your existing unit. A quality aftermarket equivalent – a tempered or laminated impact panel from a documented fabricator, a shower door assembly, a factory-spec hinge set – can cost meaningfully less and perform correctly when the panel is properly sized and laminated to match. What you don’t want is an unlabeled part with no spec sheet. Without a manufacturer spec and warranty behind it, our own guarantee has nothing solid to sit on. We install documented, name-brand materials for that reason, and we’ll tell you plainly when an OEM part is the only honest choice.
Bradford Remodeling Sunrise Manor is an independent service provider. We are not affiliated with PGT, and we don’t claim to be. What we do is source, fit, and install PGT-compatible components and handle the full bathroom rebuild around them – from substrate and rough-in to finish.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Bathroom Remodeling Is Failing
Here’s how owners in Sunrise Manor usually find out something is wrong – often mid-shower, water running where it shouldn’t.
- Fogging or moisture trapped between the glass panes. The factory seal on a sealed impact unit has given up. Once the desiccant inside is saturated, condensation stays put – it doesn’t clear with a warm shower or a sunny day, because there’s no air exchange inside the unit.
- Hinge sag on a PGT-spec shower door or glass panel. The glass itself is fine; the hinge or pivot set underneath has worn or the screws have pulled from their anchors as the framing shifted. A door that won’t hang true on its own is a hardware and anchoring problem, not a glass problem.
- Seal or gasket failure along the frame. Southern Nevada’s summer heat plus dry winter air cycles framing and sealant constantly. A gasket that’s gone brittle lets water track behind the unit and into the substrate – which is where real damage starts.
- Water staining or soft framing around the opening. This is the expensive symptom. Moisture has been reaching the wall cavity, and the substrate behind the tile or panel is now compromised. The visible part failing was the last thing to go.
- Chips or cracks at the glass edge. Edge damage on tempered or laminated glass is a structural failure waiting on one slammed door. A chipped edge can spider out with no warning – replace it, don’t patch it.
One honest safety note before anything else. If a glass panel is cracked, chipped at the edge, or clearly loose in its frame, that’s a safety issue and a security issue, not just a cosmetic one. Tempered glass that lets go releases all at once, in small pieces, and it can happen while you’re standing in front of it. Don’t try to re-hang a compromised panel yourself, don’t drill near a glass edge, and don’t attempt to re-glaze a sealed impact unit. That work belongs to someone trained and equipped for it. Keep everyone away from the failed panel until it’s assessed, and call us.

See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed ranges we quote in Sunrise Manor. These are written prices, given up front, before any work starts:
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives a quote up or down: whether the rough-in plumbing moves, how much substrate repair you need behind the tile, the glass spec you choose, and whether you stay with stock sizes or go semi-custom. Parts are priced separately and shown on the line item, so you can see exactly what the component costs and what the labor costs – no bundled mystery number.
Every completed project carries the 365-Day Done Right Promise – a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge. You leave the job with a signed written guarantee in your hand, not a verbal assurance.
DIY or Call Us?
Some of this an owner can check. Identify your PGT model number and note the label. Measure your opening. Check whether the seal is soft, cracked, or missing. Photograph any staining. That’s the smart part, and it saves time on the estimate.
Where DIY goes wrong is at the glass and the wall behind it. Replacing a sealed impact unit, swapping a tempered shower door, re-anchoring a pivot hinge into tired framing, re-establishing the waterproofing layer behind a panel – these need the right tools, the right sealants, and an understanding of what’s behind the surface. A shower door that goes back slightly out of square is a leaking shower door, and the leak is the expensive part. Glass carries real injury risk if it’s mishandled. Call (844) 834-2810 for a free estimate and let us sort out what’s actually failing.
FAQs

Plan on roughly 10 to 20 years for a properly specified impact glass unit or shower door assembly in this climate, with the low end more common on south- and west-facing baths that take full afternoon sun. Southern Nevada’s heat cycling and dry air are hard on seals and gaskets, so seal condition – not the glass – is usually what ends a part’s life. Call (844) 834-2810 for an exact quote on your replacement – estimates are free.
Sometimes, and we’ll tell you when. A hinge or pivot set can often be swapped without touching the glass, and re-sealing a frame is legitimate repair instead of replacement. A sealed unit with moisture trapped between the panes cannot be repaired – the seal is inside the factory assembly. Same for any edge chip or crack in tempered glass. Call (844) 834-2810 and we’ll assess which side of that line you’re on.
A single hardware or glass component replacement is typically a same-day job once the correct part is on site. A full bathroom remodel in Sunrise Manor runs considerably longer and depends on substrate condition, tile scope, and whether the rough-in moves. We put the schedule in writing with the price so you know what you’re planning around. Call (844) 834-2810 for a free estimate.
We work from your model and series designation plus the three-axis measurements of your opening, then match against documented manufacturer specs and warranty terms. We install name-brand materials with traceable specs – the same approach we take with KraftMaid, Cambria, and Silestone on the rest of the job – so the part is priced honestly and backed by something real. Warm, professional crew, background-checked and uniformed, on every job. Call (844) 834-2810 to schedule your free estimate.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












