







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Sunrise Manor Owner’s Guide
An IKO bathroom remodeling package in Sunrise Manor typically runs $9,000 – $28,000, and we give you that number in writing before any work starts. We’re an independent contractor that installs bathrooms built around IKO waterproofing and tile-backer systems. We are not affiliated with IKO; we’re just fluent in their product line.

Sunrise Manor homeowners usually find out something is wrong the same way: a soft spot near the shower pan, grout that keeps cracking no matter how many times it’s patched, or a musty smell that comes back after every cleaning. That’s the point where you need someone who can read the substrate, not just replace the visible tile.
Key Takeaways
- Full bathroom remodel around an IKO system: $9,000 – $28,000 installed in Sunrise Manor.
- We don’t stock parts or carry inventory on a truck; we source the correct IKO system for your job during the build.
- Waterproofing failures are almost always a substrate or detailing problem, not a product failure.
- Every project gets a written price up front and is covered by the 365-Day Done Right Promise.
Which IKO Models This Applies To

IKO makes several systems that turn up in Sunrise Manor bathrooms: waterproofing membranes (roll-on and sheet), cement backer board, and their tile underlayment products. The exact product that matters depends on where the bathroom is in the house and what’s underneath it. A slab-on-grade bathroom in Sunrise Manor behaves differently than a second-floor bathroom over wood subfloor, and the IKO system has to match. That’s the first compatibility gotcha most owners miss.
To identify what you have, pull a label from the product packaging or look for the printed stamp on the membrane or backer board. IKO prints product names, lot numbers, and sometimes a warranty code directly on the material. Photograph that before demolition starts. If the label is gone, a moisture reading and a substrate inspection tell us more than a guess ever will.
On OEM versus aftermarket: IKO’s own accessories (primers, seam tape, drain details) are matched to their membrane chemistry. Generic equivalents can work, but the failure window tightens. In our experience, a mismatch between IKO membrane and a non-compatible primer is one of the top causes of early delamination in desert bathrooms. On this page we also install KraftMaid, Cambria, and Silestone finishes, so the waterproofing and the finished surface are specified together, not handed off between trades.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
- Grout cracking in a repeating pattern. Usually means movement in the substrate or a membrane that didn’t bond flat. Grout doesn’t crack randomly; the pattern tells you what moved.
- A soft or spongy spot at the shower threshold or drain curb. Water is getting past the waterproofing detail, not the tile. That curb is the single most common failure point we find.
- Musty smell that returns within a week of cleaning. Moisture is trapped in the substrate or behind the backer board. Cleaning the surface fixes nothing if the assembly underneath is wet.
- Efflorescence (white powder) on tile or grout lines. Salt is migrating to the surface from moisture moving through the assembly. It’s a moisture problem with a cosmetic symptom.
- Loose tile with no visible crack. The bond broke, usually because the membrane surface was contaminated or the thinset was wrong for the substrate.
Nevada’s dry air and big temperature swings between day and night don’t cause water damage on their own, but they do stress an assembly that’s already compromised. Once moisture is in, the dry heat pulls it out slowly and the failure becomes visible later than it would in a humid climate.
Replacement Cost & What’s Included

Here’s what a Sunrise Manor bathroom remodel runs when IKO waterproofing is part of the scope. Prices are installed, not just materials:
| Scope | Installed Range (Sunrise Manor) |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What moves you up or down that range: how much demo is needed, whether the subfloor is intact, the tile you choose, and whether the drain and supply lines need moving. We put all of that in a written line-item price. The 365-Day Done Right Promise covers every completed project for a full year; if the work fails inside that window, we come back and correct it at no charge to you. No surprise change orders after the number is signed.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check on your own: look for visible cracks, press gently on the shower curb and threshold to feel for softness, run the shower for five minutes and watch where water pools or wicks, and photograph any labels or stamps on the IKO product for reference.
Where DIY goes wrong: improper slope toward the drain, skipped seam tape, wrong thinset, or a membrane that gets punctured during backer board install. Any one of those undoes the whole waterproofing layer, and you won’t know until the tile is set. That’s a $9,000 – $28,000 bathroom that has to come apart again. A visual check tells you a lot; opening it up and reinstalling the system is a different job. Call us at (844) 834-2810 when you’re ready for a written estimate.
FAQs

A properly installed IKO membrane system should outlast the tile installed over it, with 15 to 20 years being a reasonable expectation in a normal residential bathroom. Real lifespan in Sunrise Manor depends on substrate condition, drainage, and whether the shower was built with the right fall toward the drain. Call (844) 834-2810 for an exact quote on your bathroom; estimates are free.
Sometimes. Localized membrane damage can sometimes be patched if the surrounding assembly is sound and dry. If the substrate under it is compromised, a patch is a temporary fix and we’ll tell you honestly. We give you a written scope either way, so you can weigh repair against replacement on real numbers.
A single shower rebuild typically takes 5 to 10 working days, while a full bathroom remodel in Sunrise Manor usually runs 2 to 4 weeks depending on tile, plumbing, and allow-drying time between waterproofing and finishes. We don’t compress that schedule; doing it faster is how waterproofing failures happen. Call (844) 834-2810 for a written estimate with the timeline in it.
We identify your existing IKO product by label, stamp, and substrate inspection, then source a compatible replacement through manufacturer supply channels for your specific build. We don’t claim to stock parts or carry them on a truck. Every specification is documented so you have a paper trail of what was installed and when. Call (844) 834-2810 to schedule your free estimate.
Schedule Your Free Estimate
If you’re looking at soft grout, a spongy curb, or a bathroom that smells damp no matter what you do, that’s a waterproofing problem, not a surface one. We’ll come look, tell you what we find in plain terms, and hand you a written price before any work starts. Every job comes with the 365-Day Done Right Promise and a guarantee in your hand at close. Call (844) 834-2810 to schedule your free estimate for your Sunrise Manor bathroom.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












