







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Driveway & Pavers: The Sunrise Manor Owner’s Guide
We install CertainTeed-compatible driveway and paver systems across Sunrise Manor, and a full paver driveway typically runs $7,000 – $18,000 installed, with paver patios at $3,500 – $11,000. When a paver field, edge restraint, or base course fails, we can usually schedule a free on-site estimate within a few days and get a written, line-item price before any work starts.

Most Sunrise Manor owners don’t catch the failure at the surface first. They notice a low spot where water pools after a monsoon storm, a paver that rocks underfoot near the garage apron, or a hairline of sand washing out along the driveway edge every time it rains. That’s a drainage and base problem showing itself at the top, and by the time it reaches the surface the substrate underneath has usually already moved. CertainTeed makes the pavers and the bedding components, not the driveway as a single part, so understanding which layer failed is the whole job before you price anything.
Bradford Remodeling Sunrise Manor is an independent remodeling contractor. We’re not affiliated with CertainTeed; we install and repair systems that use CertainTeed pavers and compatible base and joint components, and we name the products in writing on every scope.
Which CertainTeed Models This Applies To

The phrase “CertainTeed driveway and pavers” covers a few different product layers, and matching the right one matters more than most homeowners expect. On the paver side, CertainTeed’s hardscape lines include structural slab pavers and thinner overlay profiles, and the two don’t share a base specification: a structural paver needs a deeper compacted aggregate base, while a thin overlay is meant to sit over a sound existing slab. Put the wrong profile over the wrong base and it will fail in one or two Las Vegas Valley summers regardless of how good the paver is.
Here’s how to identify what you actually have. Look for a stamp or ink mark on the underside of a loose paver, and measure its thickness and face dimensions with a tape – CertainTeed paver profiles run in standard nominal sizes (commonly 60mm and 80mm thick for structural pavers, with modular face dimensions), and the thickness tells you which base system it belongs to. If the original installation paperwork is gone, a photo of the underside stamp plus the measurements is usually enough for us to match the profile.
On the OEM-versus-aftermarket question: for pavers specifically, there’s no mechanical “part” to interchange the way there is with a window sash or a cabinet hinge. What matters is profile match – thickness, face size, color family, and edge chamfer – so the repair blends into the existing field. We’ll tell you plainly if a discontinued CertainTeed color can’t be matched and what a partial-field replacement would cost instead, because promising a seamless blend on a discontinued run is how contractors create callbacks.
We also work with other documented brands, including KraftMaid, Cambria, and Silestone, on the interior side of the same homes, so specifications stay traceable whether we’re on the driveway or in the kitchen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Driveway & Pavers Is Failing
These are the symptoms Sunrise Manor homeowners describe when they call us, and what’s usually happening underneath each one.
- Pavers rocking or “walking” underfoot. A paver that moves when you step on it has lost its bedding sand and the base beneath it has settled or wasn’t compacted in lifts. In Sunrise Manor, the most common trigger is a base installed too thin over our caliche-heavy soil, which doesn’t drain the way a proper aggregate base does.
- Sand washing out along the edges after rain. A monsoon downpour pushing joint sand out at the perimeter usually means the edge restraint has shifted or wasn’t pinned deep enough. The pavers themselves may be fine; the restraint is the part that failed.
- Low spots where water pools and stands for days. Ponding on a paver driveway points to a drainage slope problem – typically less than the roughly 1 – 2% slope a driveway needs to shed water. Standing water in our heat accelerates joint sand loss and can stain certain paver colors.
- Hairline cracks spreading across individual pavers. Cracks through the paver face, not just the joint, usually mean point-loading from a hard spot in the base or a paver laid over a void. One cracked paver is a replacement; a pattern of them is a base investigation.
- Efflorescence – white, chalky bloom on the surface. That haze is mineral salts migrating up through the paver as moisture moves through it, and in Southern Nevada it’s often the first visible sign that water is getting into the base and not draining out. It’s cosmetic at first and a warning later.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the range we quote in Sunrise Manor for CertainTeed-compatible paver work, installed, with the written price locked before any tool comes out:
| Scope | Installed Price Range (Sunrise Manor) |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing (existing pavers) | $250 – $700 |
| Concrete driveway (alternative to pavers) | $4,500 – $12,000 |
What drives you toward the top of a range: square footage, whether the existing base has to be excavated and rebuilt, how much of the field is being replaced versus patched, and whether the edge restraint system needs to be re-pinned. Parts and labor are broken out line by line in the written quote, so you can see exactly what the pavers, base aggregate, bedding sand, edge restraint, and labor each cost. Every completed driveway or paver project carries our 365-Day Done Right Promise – a full-year written guarantee; if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
There’s a real split here, and it’s worth being honest about. You can safely check a few things yourself: pull a loose paver and photograph the underside stamp, measure thickness with a tape, note where water pools after a storm, and take photos of any cracked faces. That information helps us match the profile before we arrive.
What goes wrong with DIY on a paver driveway is almost always the base. Homeowners who top-dress a settled area with new sand or re-set pavers on the existing bed are back to the same low spot within a season, because the aggregate under the pavers is what failed, not the sand. Rebuilding a base means excavation, compacting in lifts to a specified density, and re-establishing drainage slope – work that’s physically heavy, needs compaction equipment, and is easy to get subtly wrong in a way that only shows up after monsoon season. And a paver driveway is a hardscape surface a vehicle drives on; a base that gives way under a car is a real hazard, not a cosmetic issue.
If you’ve got a rocking paver, sand washing out at the edge, or a low spot that’s been pooling for more than one rainy season, call us at (844) 834-2810. A live person answers, day or night, and the on-site estimate is free.
FAQs

How long do CertainTeed pavers last in Sunrise Manor? CertainTeed pavers themselves are a long-life product – decades, when the base is right – but the base and joint system are what determine real-world lifespan in Southern Nevada. Our intense UV, low humidity, and caliche soil stress the base and edge restraint far more than the paver face, so a paver driveway here lives or dies on proper base compaction and drainage slope, not on the brand of paver alone. Call (844) 834-2810 and we’ll assess which layer is failing before quoting a replacement.
Can a failing paver driveway be repaired instead of fully replaced? Often, yes. If the failure is isolated – a handful of cracked pavers, a section of edge restraint that came loose, one low area from a settled base – we can lift and reset that section, rebuild the base beneath it, and reinstall matching pavers. A repair costs a fraction of a full replacement and is usually the right call when the rest of the field is sound. If the base has failed broadly, a partial patch just moves the problem. Call (844) 834-2810 for a free estimate and we’ll tell you honestly which it is.
How long does a paver driveway repair or replacement take? A localized repair – resetting a section, re-pinning edge restraint, re-sanding joints – is typically a one- to two-day job. A full paver driveway replacement generally runs several days to about a week depending on square footage and how much base excavation is needed, and we give you the schedule in writing with the price. Call (844) 834-2810 to get your scope and timeline quoted.
How do you source the CertainTeed pavers for my repair? We order CertainTeed pavers through authorized suppliers to match your existing profile, and we confirm thickness, face dimensions, and color before ordering. If your original color is discontinued, we’ll tell you upfront rather than after the materials arrive, and quote a partial-field replacement with the closest current match. Every product is named in the written scope so the specification is traceable. Call (844) 834-2810 and we’ll start with a photo of your paver stamp.
Bradford Remodeling Sunrise Manor is part of the Garrison Partners family, independently owned and operated and held to The Garrison Standard – which means every price is written before work begins, every crew is background-checked and uniformed, and the 365-Day Done Right Promise is printed on paper you hold at close. Call (844) 834-2810 for a free estimate on your CertainTeed driveway and paver work in Sunrise Manor.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












