







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Sunrise Manor Owner’s Guide
We install Sterling-compatible driveway and paver systems in Sunrise Manor, and a full paver driveway replacement typically runs $7,000 – $18,000; concrete replacement runs $4,500 – $12,000, and driveway replacement as a category lands at $5,000 – $14,000. Small paver repairs are usually quoted as a line item inside that scope, and estimates are free. We’re an independent service provider and not affiliated with Sterling.

Owners in Sunrise Manor usually find out their pavers are failing the same way: they step out of the car after a July afternoon and the paver at the driveway lip rocks underfoot, or a joint keeps opening right back up after every re-sanding. The other common picture is concrete that looks fine from the street but has spalled across the surface after a couple of hard freezes, which happens more in Sunrise Manor than people moving here from coastal California expect. Sterling’s product line has specific failure points tied to how our desert climate cycles through heat, hard sun, and occasional overnight freezing. That’s the part worth understanding before anyone quotes you a number.
Which Sterling Models This Applies To

Sterling makes paver-style driveway products across its residential line, and compatibility depends on three things: the product family, the paver thickness, and the edge restraint system your existing install used. A standard residential driveway paver is typically 2 3/8 inches thick; heavier vehicular-rated pavers run 3 1/8 inches. If you’ve got an older install with the thinner profile and you’re replacing only a section, matching the thickness matters more than matching the visual color, because mismatched height creates a trip point and a joint that won’t hold bedding sand.
The fastest way to identify your Sterling product is to photograph the paver’s edge profile and note the dimensions of a single unit. On a driveway, that means pulling a loose paver at the edge, not one from the middle of a locked field. Sterling, being a brand with multiple product families, uses different joint spacing and chamfer designs between them, and a parts counter can’t tell you what you have from a color photo alone.
On OEM versus aftermarket: for a small repair, a quality aftermarket paver matched to thickness and finish is a sound choice and saves real money. For a full replacement, we recommend documenting the exact Sterling product so the manufacturer’s specification sheet is on file with your project. Bradford works from a documented roster of hardscape brands including Belgard and Unilock, and we’ll tell you plainly when a Sterling match is the better call so your specifications stay traceable rather than guesswork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
- Paver settlement at the driveway apron. The paver directly behind the sidewalk dips because the base aggregate underneath has shifted or washed out. Hitting that dip at an angle will eventually crack the unit’s edge.
- Joint sand that won’t stay put. Sand washes or blows out of the joints within weeks of a refill. That signals a missing joint stabilizer or a bedding layer that’s no longer draining, not simply worn sand.
- Spalling on concrete surfaces. Chips and white flakes across a concrete driveway come from surface moisture freezing and expanding at the top layer. In Sunrise Manor, the evening cooldown after a wet winter day is exactly the pattern that causes it.
- Hairline cracks filled with weeds. A crack with green in it is a working crack, moving seasonally rather than failing all at once. Weed growth tells you the break runs deeper than the surface.
- Efflorescence that returns. The white mineral haze on pavers or concrete is water moving through the slab and leaving salts behind. When it comes back after every rain, the underlying drainage isn’t solved.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s where the money usually lands in Sunrise Manor, quoted as installed lines rather than parts-only figures:

- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway replacement (full demolition and rebuild): $5,000 – $14,000
- Driveway sealing: $250 – $700
The range is driven by square footage, base aggregate depth, whether existing material has to be torn out and hauled, and the edge restraint and drainage details. A paver job with a proper compacted base and a stabilized joint system costs more up front and lasts longer than a re-sand on a failing base. Every Bradford project gets a written price before any work starts, so the number you see at the estimate is the number you pay. Finished work carries the 365-Day Done Right Promise, so if the repair or install fails inside the guarantee period, we return and correct it at no charge. Technicians have up to 22 years of experience on these installs.
DIY or Call Us?
Some things you can safely check yourself: photograph the failing paver, measure its thickness, note where the settlement is, and probe the joint sand for moisture. You can also check whether weeds are holding the crack open and how fast efflorescence comes back after a rain. That’s information the crew needs at the estimate.
What you shouldn’t take on is a full driveway tear-out or a re-base. The real weight in this work is buried: the compacted aggregate base and the edge restraint. Getting that wrong shows up a season later as re-settlement across the whole field, and repointing the joints over a failing base won’t fix it. The better move is a written estimate that separates base work from surface work so you know exactly what you’re paying for. Call (844) 834-2810 to schedule your free estimate; a live person answers, and there’s no automated queue.
FAQs

How long should a Sterling paver driveway last in Sunrise Manor? Plan on a properly installed paver driveway holding up 20 to 30 years; the pavers themselves outlast the base and joint sand by a wide margin. In our climate, the joint system and base prep are what determine whether you get the long end of that range. Call (844) 834-2810 for an honest read on your specific driveway.
Can a failing section be repaired instead of replaced? Yes, if the failure is isolated to a small area and the base under it is sound. A single settled apron or a few cracked units can be lifted, re-based, and relaid. Efflorescence or shrinkage cracks running across the whole surface usually mean replacement is the stronger call. Estimation is free, and we’ll tell you which side you’re on.
How long does the replacement take? A paver driveway of typical residential size runs two to five days of working time between demolition, base prep, and install; a seal coat on an existing driveway is a half day or less. Site drying and cure time add to the schedule. Schedule depends on weather and site access, and we give those dates in writing on the estimate.
How do you source the Sterling-compatible part? We start with your paver’s measurements and edge profile, then match the specification to the right product. Bradford works with a documented roster of material brands including Belgard and Unilock, along with KraftMaid, Cambria, and Silestone where those products come into a project. That traceability is the whole point: every material has a manufacturer specification and warranty behind it, so you can check it. Brandt Remodeling Sunrise Manor runs on that standard, and we’re happy to walk you through your options.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












