







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Home Additions & ADU: The Sunrise Manor Owner’s Guide
Home additions and ADUs don’t have a “part” that fails the way a spring or a valve does – building a new room or a detached unit isn’t a swap job, and no single component wears out and gets replaced. What fails instead is the waterproofing and substrate system under the tile and flooring, and Schluter products are the layer most homeowners learn about only after a shower pan leaks or a floor tile cracks. If that’s where you are, we install Schluter systems inside additions and ADUs in Sunrise Manor, and a full home addition runs $45,000 – $130,000 while an ADU runs $90,000 – $220,000 – and no, this isn’t a same-day job. Nobody builds a habitable structure in an afternoon. We schedule a site visit and a written price before any work starts. Bradford Remodeling is an independent contractor and is not affiliated with Schluter.

Which Schluter Models This Applies To
Schluter makes hundreds of discrete system components, and the part that matters depends on where in the build it sits. For a wet area in an addition – a new shower, a converted bath, a laundry rough-in – the real workhorse is the bonded waterproofing membrane, whether that’s KERDI membrane in a sheet or KERDI-BOARD as a backer panel. For floors over a slab or over wood joists, the decoupling layer is DITRA or DITRA-HEAT if you’re adding radiant heat. For an exterior threshold or a step between an ADU slab and a doorway, it’s likely a Schluter stair-nosing or transition profile. Sizes matter: KERDI-BOARD comes in thicknesses typically from about 1/8 inch up to 2 inches, and using the wrong thickness throws off your finished wall plane relative to the door jamb and trim. Read the printed label on the board or membrane – Schluter stamps thickness and product code directly on the panel – and measure twice. There’s no meaningful aftermarket substitute for Schluter’s membrane system; generic waterproofing sheet may share a name but not the certified thickness or the warranty chain. Match the Schluter part number, not a lookalike.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Home Additions & ADU Is Failing
These are the symptoms homeowners in Sunrise Manor actually call about, which usually trace back to the waterproofing or substrate layer rather than the tile or the trim:
- Grout lines cracking in a straight grid. That pattern usually signals movement in the substrate beneath the tile – a decoupling layer that wasn’t installed, or was installed over a slab with a crack it didn’t isolate. Straight-line cracks are the fingerprint of a failed bond, not a cosmetic grout problem.
- A soft or “hollow” spot under a floor tile. Tap across the floor with a coin. A tile that sounds hollow is sitting on a void, often where the substrate wasn’t properly prepped or where moisture got under the membrane.
- Grout or caulk discoloration at a shower base. Persistent mildew that comes back after cleaning likely means water is trapped behind the tile – a failed bond at the Schluter membrane, or a missing pre-sloped shower tray.
- Tile lifting at a step or doorway edge. Transition profiles loosen when the adjacent slab or subfloor has shifted. This shows up most on ADU slab-to-house thresholds where the two structures settle differently.
- Efflorescence (white powdery staining) on grout or base. This is salt pushed to the surface by moisture migrating through the assembly – a sign the waterproofing is compromised somewhere upstream.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Because this isn’t a swap-in-a-part service, “replacement cost” for a Schluter addition or ADU project means the full build or rebuild of the affected area. Here’s the Sunrise Manor pricing range we work from, with a written price before any work starts and no numbers that move once the truck is on site:
| Scope | Installed Price Range |
|---|---|
| Home Addition (room or extension, full build) | $45,000 – $130,000 |
| ADU Construction (detached unit) | $90,000 – $220,000 |
| Garage Conversion (to living space) | $30,000 – $80,000 |
| Bathroom Remodel with Schluter waterproofing | $9,000 – $28,000 |
| Walk-In Shower Installation (KERDI system) | $4,500 – $12,000 |
| Tile floor over slab with DITRA decoupling | $2,000 – $6,500 (countertop range applies to surface work; floor assemblies priced per square foot in the scoped estimate) |
What drives the range: square footage, whether you’re building new or converting existing space, whether structural work is needed (headers, slab cuts, framing for a door rough-in), the thickness and type of Schluter panels specified, and finish level. Every quote is line-item and written. The work is covered by our 365-Day Done Right Promise – if something fails inside the guarantee period, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: read the printed product code on a Schluter panel, tap floor tiles to find hollow spots, test base perimeter for moisture with a simple humidity meter, and photograph any cracking or efflorescence for the record. What you should not do yourself is attempt to install or replace Schluter’s bonded waterproofing membrane, build a shower pan, or re-tile over a failed substrate. This is not a spring or an electrical panel, but the risks are real in a different way – a compromised waterproofing layer means water damage and mold inside your walls, and a failed floor-over-substrate assembly can mean cracked tile and, in a bad case, a structural problem you can’t see. A mis-installed Schluter assembly also voids Schluter’s own warranty and ours. If you’re unsure, call us at (844) 834-2810 and we’ll tell you straight whether it’s a check-the-tile hour or a rebuild.
FAQs

A properly installed Schluter KERDI membrane or KERDI-BOARD system typically carries a manufacturer’s warranty measured in years, and in normal use it holds for the life of the tile. In Sunrise Manor, the sun and dry heat speed up slab movement and cause the substrate to expand and contract harder than in wetter climates, so a decoupling layer (DITRA, or KERDI with proper pre-slope) matters more here than in most of the country. Call (844) 834-2810 for a free estimate if you’re unsure the system was installed to spec.
Sometimes – a localized crack or a single hollow tile can be repaired. The decision comes down to whether water has already reached the substrate. If moisture is confirmed at the base or under the floor, the honest answer is that the membrane needs to come out and be rebuilt; patching over a wet substrate just hides the problem for a year. We’ll tell you which it is after a site visit, and the estimate is free.
An addition runs several weeks to a few months depending on size and complexity; an ADU takes longer. There is no same-day version of this work, and any contractor who offers one on a new structure is telling you something. We scope it in writing, include a realistic schedule, and don’t start a project we can’t finish. Call (844) 834-2810 to schedule the estimate visit.
We work through documented supplier channels for Schluter system components and won’t substitute a generic sheet membrane for the certified product. Every project receives a line-item priced spec listing each Schluter product by code, so you can verify it against the label on the box before it goes in. We also install KraftMaid cabinetry, Cambria and Silestone surfaces where the project calls for them. No parts are stocked on a truck; they’re ordered to the spec. Call (844) 834-2810 and we’ll walk you through the spec before you sign.
If you’re at the point where the answer is “rebuild, not repair,” call Bradford Remodeling Sunrise Manor at (844) 834-2810 to schedule a free estimate. The price is written before work starts, the work is covered by our 365-Day Done Right Promise, and a live person answers the phone any hour.
Written by the team at Bradford Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












