A Bradford company - serving Sunrise Manor, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
American Standard · Sunrise Manor

American Standard Kitchen Remodeling in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled staircase with wood treads and a slim metal railing
A low-threshold walk-in shower with a bench and grab bar
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

American Standard Kitchen Remodeling: The Sunrise Manor Owner’s Guide

We install American Standard-compatible kitchen components for Sunrise Manor homeowners, with full kitchen remodels typically running $14,000 – $45,000, cabinet installation $4,000 – $13,000, and countertop installation $2,000 – $6,500 depending on scope and materials. American Standard itself doesn’t make kitchen cabinetry or countertops, so what most owners are actually replacing is a fixture or fitting carrying the American Standard name – a faucet, a sink, a supply valve – that’s failed mid-remodel or stalled a project before it started. The discovery usually goes the same way: the old faucet drips onto new cabinets, the sink doesn’t fit the cutout the counter fabricator cut, or a builder-grade valve won’t hold to the new rough-in. Call (844) 834-2810 and we’ll price it in writing before anything comes off the wall.

Contractor using a level to install a new residential door frame in Sunrise Manor, NV

Call (844) 834-2810

Which American Standard Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

American Standard kitchen fixtures fall into a few families worth knowing by name. The Colony and Sterling lines sit at builder-grade spec – common in Sunrise Manor’s 1990s and 2000s tract homes – and use standard 1.5-inch drain openings with 8-inch widespread or 4-inch centerset faucet drilling. Above that, the Delancey and Fairbury pull-down faucets and the Portsmouth bridge faucet use a different valve cartridge and a wider escutcheon plate, which matters when you’re reusing an existing three-hole deck. Spec the wrong one and the holes don’t line up with the plate, or the plate won’t cover the old drilling.

To identify what you have, shut off the water and look at two places: the model number stamped on the faucet body near the supply connection (not the aerator), and the underside of the sink rim, where American Standard stamps the model and material code. Measure your existing cutout and the spread between faucet holes before you buy anything – those two dimensions, not the brand, decide whether a replacement drops in. On the OEM-versus-aftermarket call: for a faucet cartridge or aerator inside a fixture you’re keeping, an OEM American Standard part is the right choice because tolerances change between production runs. For the fixture as a whole, a quality aftermarket equivalent from a documented brand like Moen or Kohler is often a better long-term buy than chasing a discontinued American Standard model, and we’ll say so plainly when that’s the case. We don’t stock parts or carry them on a truck – what we do is specify the exact replacement and install it as part of the remodel.

Bradford Remodeling is an independent service provider. We’re not affiliated with American Standard, and we don’t claim to be.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your American Standard Kitchen Remodeling Is Failing

  • The faucet drips from the spout when shut off. That’s a worn ceramic cartridge or seat, not a loose handle. American Standard cartridge assemblies fail at the O-rings first, and a slow drip will stain a new cabinet run within months.
  • The pull-down head won’t stay seated. The magnet or clip in the spray head wears out on the Delancey and Fairbury lines, and the head hangs. It’s a small part, but replacing it means matching the exact head to the spout, not just the brand.
  • Water weeps at the base of the faucet onto the deck. The mounting gasket has compressed or the escutcheon seal has failed. Left alone, water tracks back to the cabinet substrate and softens it.
  • The sink cutout doesn’t match the new counter. This is the failure owners find mid-project. If the fabricator cut for the wrong sink, the American Standard model you bought won’t seat and the counter is already drilled.
  • Supply valves won’t fully shut off. A valve that only slows the water, not stops it, means the rough-in needs attention before a new fixture goes on. That’s a plumbing job, and it’s the one to catch early.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A walk-in shower with large-format tile and a built-in niche

Here’s what our Sunrise Manor pricing looks like for the kitchen work around an American Standard fixture replacement. Lead range for a full kitchen remodel is $14,000 – $45,000. A small kitchen remodel runs $9,000 – $20,000. Cabinet installation $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash installation $800 – $2,500, and a kitchen island $3,000 – $10,000. A fixture swap on its own is priced as part of the job, not a line item you have to chase.

The range moves on three things: cabinet box and door material, counter surface (Cambria and Caesarstone sit at the top, laminate and butcher block at the bottom), and whether the rough-in needs correction. Every price we give you is written before work starts, and it doesn’t move at the door. The completed work carries the 365-Day Done Right Promise – a full-year written guarantee, and if the work fails inside that window we come back and correct it at no charge.

DIY or Call Us?

There’s a short list of things you can safely check yourself. Read the model number, measure the faucet spread and sink cutout, and look for water staining under the cabinet floor. That’s information gathering, and it helps us quote accurately.

Where DIY goes wrong is anything past the shutoff valve. Replacing a supply valve, correcting a rough-in, or resetting a faucet that won’t seal requires the water off at the main and a proper joint – done wrong, it fails behind a finished cabinet wall where you can’t see it until the damage is done. If you’re not sure the valve holds, don’t test it by opening it under pressure. Call us instead. We’ll tell you over the phone whether it’s a fixture job or a plumbing job, and we answer live, 24 hours a day, 7 days a week, at (844) 834-2810.

FAQs

A remodeled family room with new windows and a window seat

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeA finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 834-2810
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Bradford Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch