







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunrise Manor Homeowners Choose ViewLux Construction
We provide independent ViewLux service and installation in Sunrise Manor, NV, and our work on ViewLux enclosures is defined by one thing: we fit glass and hardware to your actual opening rather than to a factory-standard one. ViewLux builds frameless pivot and sliding shower doors, neo-angle corner enclosures, and bath mirrors sold largely through glass and bath dealers, so the installer has to solve for real walls, curbs and floors. We’re an independent service provider and are not affiliated with or authorized by ViewLux. Call (844) 834-2810 and a live person answers, day or night.

Why Trust Bradford Remodeling Sunrise Manor for Your ViewLux Construction?

Our technicians have up to 22 years of experience, and a good share of that has been spent on glass-and-hardware work exactly like the ViewLux line. Frameless pivot doors, bypass sliders and neo-angle enclosures all hang on hinge geometry and anchoring, and that anchoring is where most trouble starts. A pivot hinge set into tile over drywall-backed studs will hold for a while, then the door starts to drop. We know the difference before we drill.
On parts, we match hardware to the enclosure’s glass thickness and hole pattern. ViewLux-specific replacements are our first choice. Where a hinge, roller or handle has been discontinued, quality aftermarket seals and sweeps are acceptable on the wet side, provided they’re sized right. We don’t substitute a generic hinge because it’s what’s in reach.
That matters for your warranty. ViewLux coverage depends on the glass and hardware being installed as specified, so drilling a tempered panel to “make it fit” or hanging a heavy door off an unbacked stud can void it. We work within those limits, and we tell you when a fix would push past them before any tool comes out. Every price is written before work starts, and every completed job carries the 365-Day Done Right Promise: if it fails within a full year, we come back and correct it at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ViewLux Construction Problems We Fix in Sunrise Manor
- Water escaping at the hinge side or under the door sweep. This usually isn’t a bad door. The enclosure was set plumb to a wall that was out of level, so the bottom gap runs uneven across the curb and water finds the low spot. Fixing it means re-leveling the glass line, not caulking over the gap.
- Pivot door sag or drag on heavier frameless units. The hinge was anchored into drywall-backed studs or tile only. A frameless ViewLux pivot panel is heavy, and tile alone won’t carry it long term. The door drops slowly until it drags on the curb or the jamb.
- Silicone and sweep failure on sliding and bypass units. The curb and vertical jambs are the weak points. When the sealant breaks down, water tracks out onto the bathroom floor and stains the flooring and baseboard over a season or two.
- Glass ordered to nominal size instead of site-templated. When walls and curbs are out of square, a stock panel leaves oversized gaps, forces extra trim, or gets reordered entirely. Templating before the order is what prevents it.
- Loose handles and door-to-glass connections. On semi-frameless and framed ViewLux mirrors and doors, backer hardware works loose from repeated use. Re-torquing to spec with the right isolating gaskets stops the rattle and keeps the glass from being stressed at the hole.
These failures cluster in Sunrise Manor’s older east-side pockets, where slab foundations and decades of settling leave a bathroom wall well out of plumb. A frameless enclosure that looks square in a showroom won’t sit square in a 1970s tract home until someone templates it against the wall that’s actually there.
ViewLux Parts & Our Repair-vs-Replace Approach

Hardware is where the money usually goes, and it’s where the least expensive fix lives. Hinges, pivots, rollers, sweeps, seals and handles should match your enclosure’s glass thickness and hole pattern. ViewLux-specific replacements are preferred; where an exact part is discontinued, a quality aftermarket seal or sweep is fine, sized correctly.
Glass itself is rarely worth repairing. A chipped or cracked tempered panel is a replacement, full stop. But a structurally sound enclosure with tired hardware or worn seals is almost always worth re-fitting rather than replacing. We order per job to your opening and model, so nothing is guessed at. We’ll tell you plainly which side of that line your enclosure is on, and the price is written before we start.
Call (844) 834-2810 and we’ll walk you through what your ViewLux unit needs.
Our ViewLux Service Process – Step by Step
- 1
Diagnose on site. We check level and plumb at the wall and curb, confirm hinge anchoring into real studs, and measure the existing gap along the bottom. That measurement tells us whether the problem is hardware or a bad set.
- 2
Repair or install. We re-secure or replace hinges, rollers, sweeps and seals with correctly sized parts, or template and set a new panel to your actual opening. On a conversion, we handle the rough-in coordination when the shower base changes.
- 3
Test the enclosure. We run water across the full width of the door and inspect the hinge side, the sweep line and the curb seal, then adjust the swing so the door closes flush against the jamb without dragging.
- 4
Back it in writing. Every completed job is covered by the 365-Day Done Right Promise. If the repair or install fails within a year, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterViewLux Products We Service & Install in Sunrise Manor
We service and install the ViewLux lines you’ll find through glass and bath dealers: frameless pivot shower doors, sliding and bypass tub-shower glass doors, neo-angle corner shower enclosures, and framed and semi-frameless bath mirrors. Our core sub-services on this page are frameless glass shower enclosures, walk-in shower installation and tub-to-shower conversion. Tub-to-shower work is the most common call we get in Sunrise Manor, since so much of the single-story stucco tract housing out here was built with a standard tub and glass slider. Converting means reworking the rough-in and templating the new glass to the existing opening. We’re independent and order to your job.
We Also Service These Brands
ViewLux isn’t the only line we work with. Bradford Remodeling Sunrise Manor handles KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures across our bathroom and kitchen work. That means when your shower conversion touches the vanity, the tile or the plumbing trim, you’re not chasing a second contractor. One crew, one written scope, one guarantee.
FAQs – ViewLux Construction Service in Sunrise Manor

Is Bradford Remodeling Sunrise Manor authorized by ViewLux? No. We are an independent ViewLux service provider and are not affiliated with or authorized by ViewLux. We install and repair ViewLux enclosures and mirrors using correctly matched hardware, and we work within the manufacturer’s spec so your coverage stays intact. Call (844) 834-2810 for an estimate.
Do you use genuine ViewLux/OEM parts? We use ViewLux-specific replacement hardware as our first choice, matched to your glass thickness and hole pattern. Where an exact part is discontinued, quality aftermarket seals and sweeps are acceptable on the wet side. Call (844) 834-2810 and we’ll confirm what your model takes.
How long does ViewLux service take? Hardware-only work (hinges, rollers, sweeps, seals) is often a single visit. A fresh installation or tub-to-shower conversion depends on templating and glass lead time, usually a few weeks start to finish. Call (844) 834-2810 for a written timeline.
What ViewLux models/series do you cover? We cover frameless pivot shower doors, sliding and bypass tub-shower glass doors, neo-angle corner enclosures, and framed and semi-frameless bath mirrors. Tell us the model and opening size at (844) 834-2810 and we’ll confirm.
Will service void my ViewLux warranty? A correct install won’t. Problems come from drilling tempered glass to make it fit or anchoring a heavy door into unbacked drywall studs. We check anchoring and work within spec, and if a fix would push past what the warranty allows, we tell you first. Call (844) 834-2810.
How much does ViewLux construction cost in Sunrise Manor? Typical ranges for this market:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (844) 834-2810 for an exact quote – estimates are free, and the price you get is in writing before any work starts.
Book Your ViewLux Service in Sunrise Manor, NV
Whether your ViewLux pivot door is dragging, your bypass slider is leaking at the curb, or you’re converting a tub to a walk-in shower, we’ll give you a written price before work starts and back the result for a full year. Call Bradford Remodeling Sunrise Manor at (844) 834-2810 for a free estimate.
Written by the team at Bradford Remodeling Sunrise Manor.












